Table of Contents
Advertisement
Right
a USB ports ×4
Connect USB storage devices, keyboards, and other
external devices here.
The SuperSpeed USB (USB3.0) is supported.
USB cameras and other USB devices not mentioned
in this document are not supported.
Note
Each of the USB ports can supply a current of up to
900 mA. However, be sure to keep the total current of
the four ports within 6 W (5 V 1200 mA). Operation
may become unstable and the unit may not start up if
6 W is exceeded. Unusual amounts of heat may also
be generated in such cases.
For details on using an external keyboard for video
switching, see "Using External Devices for Video
Switching and Other Operations" (page 81).
b Ventilation holes
Do not block the ventilation holes. Doing so may
cause internal overheating, resulting in fire or damage
to the unit.
When moving the unit after use, allow the unit to cool
down sufficiently beforehand.
c Release lever
Unlocks the main display from its closed state.
14
Parts Identification
3
6
5 4
1
2
For details, see "Opening and Closing the Main
Display" (page 18).
d LAN 1 connector (RJ-45 modular jack)
Connect this to a network when you want to perform
streaming transmissions, for example.
e LAN 2 connector (RJ-45 modular jack)
Intended for future expansion.
f Reserve connector
Used for manufacturing purposes.
This cannot be used.
2
Advertisement
Table of Contents
