Table of Contents
Advertisement
Troubleshooting
Messages
During operation of the unit, messages will appear when
problems occur. Read the messages, and follow their
instructions. If the problem persists, write down the
message number that is displayed, and contact your local
Sony representative.
Message type
Message
Icon Displays in Lists
This
warning mark appears if a problem exists with
materials in the [Scene] list or [Option] menu.
Check the status in the [Option] menu, and perform the
appropriate operation.
Problems and Solutions
Check the following before requesting repairs. If the problem persists, contact your local Sony representative.
Symptom
The unit does not turn on or start
up properly.
Message number
Possible cause
An overcurrent is being supplied to
a USB-connected device.
The following types of message exist.
(Information): Notifications
(Verification): Messages that request verification
(Warning): Warnings that indicate that continuing
an operation may result in error
(Error): Warnings that indicate severe errors, such
as inability to continue operations and malfunctions
Tip
The "File Not Found" buttons in each list will be deleted
from the lists the next time the unit is started.
Solution
Disconnect the USB-connected device. In addition,
disconnect the AC power cord of the AC adapter from
the power outlet temporarily.
For details, see "USB ports" (page 14).
103
Troubleshooting
Advertisement
Table of Contents
