Installing The Remote Control Unit On The Remote Stand; Assembly Of The Remote Stand - Sony PCM-3348HR Installation Manual

1-4. Installing the Remote Control Unit
on the Remote Stand

1-4-1. Assembly of the Remote Stand

Use the following supplied parts to assemble the remote
stand.
Leg assy: 1
Support: 1
Slider: 1
Top plate: 1
Screw M5 x 25: 4
Screw M5 x 12:
2
Knob bolt (M8 x 45): 1
Knob bolt (M8 x 20): 2
Spring washer SW8: 2
Nylone washer: 2
Plane washer W8: 2
Screw +B4 x 8: 1
Screw +PSW4 x 14: 4
Cord clamper: 1
PCM-3348HR

1-4. Installing the Remote Control Unit on the Remote Stand

Procedure
(1) Assembly of the Leg Assembly
Attach the leg assembly to the support, using the four
screws (M5 x 25).
Support
(2) Installing the Slider, Top Plate and Cord Clamper
Install the slider, top plate and cord clamper as shown
in the figure below.
Top plate
M5 x 12
(2pcs)
Knob bolt
M8 x 20(2pcs)
Slider
Caster
M5 x 25
(4pcs)
Leg assy
Spring washer
Plane washer
Nylon washer(2pcs)
Knob bolt
(M8 x 45)
Cord
clamper
Leg assy
1-5