Default Settings; Channel 1 Configuration; Channel 2 Configuration; Wlan Settings - Lantronix Ethernet User Manual

Default Settings

Select 7 Default Settings from the Change Setup menu to reset the unit's Channel 1
configuration, Channel 2 configuration, Security, and Expert settings to the factory
default settings.
The server configuration settings for IP address, gateway IP address, netmask, and
WLAN remain unchanged.
Defaults for all settings are listed below.

Channel 1 Configuration

Baudrate
I/F Mode
Port No
Connect Mode
Hostlist Retry Counter
Hostlist Retry Timeout
Send Character
All other parameters

Channel 2 Configuration

Baudrate
I/F Mode
Port No
Connect Mode
Hostlist Retry Counter
Hostlist Retry Timeout
Send Character
All other parameters

WLAN Settings

Enable WLAN
Topology
Network Name
WiBox2100E User Guide
Setup Mode: Advanced Settings
9600
4C (1 stop bit, no parity, 8 bit, RS-232C)
10001
C0 (always accept incoming connection; no active
connection startup)
3
250 (msec)
0x0D (CR)
0
9600
4C (1 stop bit, no parity, 8 bit, RS-232C)
10002
C0 (always accept incoming connection; no active
connection startup)
3
250 (msec)
0x0D (CR)
0
Y (Yes)
1 (AdHoc)
LTRX_IBSS
72