Figure 4-3. Server Settings - Lantronix Ethernet User Manual

To configure the WiBox's device server settings:
1. Click Server from the main menu.
2. Configure or modify the following fields:
Server Configuration
Telnet Password
Retype Password
Advanced
ARP Cache Timeout
TCP Keepalive
Monitor Mode @ Bootup
WiBox2100E User Guide

Figure 4-3. Server Settings

Enter the password required for Telnet access.
Re-enter the password required for Telnet access.
When the unit communicates with another device on the
network, it adds an entry into its ARP table. ARP Cache
timeout defines the number of seconds (1-600) before it
refreshes this table.
TCP Keepalive time defines how many seconds the unit waits
during an inactive connection before checking its status. If the
unit does not receive a response, it drops that connection.
Enter a value between 1 and 65 seconds. 0 disables
keepalive. The default setting is 45.
Select Disable to disable the entry into the monitor mode via
the yyy or xx1 key sequence at startup. This command
prevents the unit from entering monitor mode by interpreting
the stream of characters that are received during the device
server's initialization at startup.
Web-Manager Configuration
31