Saeco Minuto Service Manual page 52

Hide thumbs Also See for Minuto:
Table of Contents

Advertisement

MINUTO
The indications BEAN-C changes from "N" to "Y".
The indications BEAN-C changes from "N" to "Y".
ERROR: The indication BEAN-C does not change; check the reed for
the cover and the wiring (JP25).
Move Pressure Lever in COFFEE position
Move Pressure Lever in COFFEE position
The indications DRIP changes from "N" to "Y".
The indications DRIP changes from "N" to "Y".
Move Pressure Lever in ESPRESSO position
Move Pressure Lever in ESPRESSO position
The indication ESP change from "N" to "Y".
The indication ESP change from "N" to "Y".
IMPORTANT NOTE: If the Pressure Lever is not inserted (on
IMPORTANT NOTE:
120V version) a warning message will be shown and the display turns
120V version) a warning message will be shown and the display turns
to yellow..
to yellow..
Check JP4 on interface board.
Check JP4 on interface board.
Press STAND_BY "
Press STAND_BY "
The machine passes to the Page 3 (BU PAGE)
The machine passes to the Page 3 (BU PAGE)
Press the ESPRESSO button to move the BU to Work
Press the ESPRESSO button to move the BU to Work
IMPORTANT NOTE: If the DREGDRAWER is not inserted or the
DOOR is not closed the BU test cannot be performed. If these 2
inputs are not in the right position, a warning message will be
shown and the display turns to yellow.
When the BU reaches the work position the indication WORK
When the BU reaches the work position the indication WORK
changes from "N" to "Y", the number of the current is minus than
changes from "N" to "Y", the number of the current is minus than
200mA (without BU) or 300mA (with BU).
200mA (without BU) or 300mA (with BU).
ERROR: The indication WORK doesn't change and remain "N", the
ERROR:
The indication WORK doesn't change and remain "N", the
display backlight changes from green to red; Check the work
display backlight changes from green to red; Check the work
microswitch (broken?), the BU motor (blocked?) and the wiring
microswitch (broken?), the BU motor (blocked?) and the wiring
(JP16).
(JP16).
If the Pressure Lever is not inserted (on
" to move to the next screen
" to move to the next screen
05 TROUBLESHOOTING
Page
11
/ 46

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents