Table of Contents
Advertisement
MINUTO
Press STAND_BY "
Press STAND_BY "
The machine passes to the Page 3 (BU PAGE)
The machine passes to the Page 3 (BU PAGE)
Press the ESPRESSO button to move the BU to Work
Press the ESPRESSO button to move the BU to Work
IMPORTANT NOTE: If the DREGDRAWER is not inserted or the
DOOR is not closed the BU test cannot be performed. If these 2
inputs are not in the right position, a warning message will be
shown and the display turns to yellow.
When the BU reaches the work position the indication WORK
When the BU reaches the work position the indication WORK
changes from "N" to "Y", the number of the current is minus than
changes from "N" to "Y", the number of the current is minus than
200mA (without BU) or 300mA (with BU).
200mA (without BU) or 300mA (with BU).
ERROR:
ERROR: The indication WORK doesn't change and remain "N", the
The indication WORK doesn't change and remain "N", the
display backlight changes from green to red; Check the work
display backlight changes from green to red; Check the work
microswitch (broken?), the BU motor (blocked?) and the wiring
microswitch (broken?), the BU motor (blocked?) and the wiring
(JP16).
(JP16).
ERROR:
ERROR: (Without BU) The absorbed current is more than 200mA,
(Without BU) The absorbed current is more than 200mA,
the display backlight changes from green to red; check the BU and
the display backlight changes from green to red; check the BU and
the motor.
the motor.
ERROR: (With BU)The absorbed current is more than 300mA, the
ERROR:
(With BU)The absorbed current is more than 300mA, the
display backlight changes from green to red; check the BU and the
display backlight changes from green to red; check the BU and the
motor
motor
Press the CAPPUCCINO button to move the BU to Home
Press the CAPPUCCINO button to move the BU to Home
When the BU reaches the home position the indication HOME
changes from "N" to "Y", the number of the current is minus than
200mA (without BU) or 300mA (with BU).
ERROR: The indication HOME doesn't change and remain "N", the
ERROR:
The indication HOME doesn't change and remain "N", the
display backlight changes from green to red; Check the work
display backlight changes from green to red; Check the work
microswitch (is broken), the BU motor (is blocked) and the wiring
microswitch (is broken), the BU motor (is blocked) and the wiring
(JP16).
(JP16).
ERROR: (Without BU) The absorbed current is higher than
ERROR:
(Without BU) The absorbed current is higher than
200mA, the display backlight changes from green to red; check the
200mA, the display backlight changes from green to red; check the
BU and the motor.
BU and the motor.
" to move to the next screen
" to move to the next screen
05 TROUBLESHOOTING
Page
04
/ 46
Hide quick links:
Advertisement
Table of Contents
