Specifications - Saeco Minuto Service Manual

MINUTO
2.1. Technical specifi cations
Power supply and output:
Temperature monitoring:
Safety system:
Coffee heat exchanger output:
Stainless steel
Gear motor:
Pump:
Overpressure valve:
Water fi lter:
Coffee grinder:
Automatic dosage:
Power consumption:
Dimensions: W x H x D in mm:
Weight:
Water tank capacity:
Coffee bean hopper capacity:
Dreg drawer capacity:
Water circuit fi lling time:
Heating time:
Grinding time:
240 V~ 50 Hz 1850 W - 230 V~ 50/60 Hz 1850 W
120 V~ 60 Hz 1500 W
(NTC) variable resistor sensor - transmits the value to the
electronic card
2 thermostats at 190°C one shot
(230 V~) 1900 W - (120 V~) 1300 W - (100 V~) 1100 W
for coffee, hot water and steam dispensing
2 rotation directions; power supply 24VC
Ulka Type EP5/S GW approx. 13-15 bar with reciprocating
piston and thermal switch 100°C 48 W, 230V, 50 Hz, 120V,
60Hz 100V, 50/60 Hz
Opening at approx. 16-18 bar
In tank
Direct current motor with fl at ceramic grinder blades
Dose adjustment controlled by the electronic system
During heating phase- approx. 5.6 A
215 x 330 x 429 mm / 8.5"x13"x16.9"
6.7 kg / 14.77 lbs
1.5 l
250 g. / 1 cup
15
Approx. 15 sec Max. on fi rst fi lling cycle
Approx. 45 sec.
Approx. 8-10 sec.
02 TECHNICAL SPECIFICATIONS
Page 01 / 05