Saeco Minuto Service Manual page 22

MINUTO
Refi ll the coffee bean hopper with
coffee beans and restart the cycle.
The machine needs to be descaled. Press the "
descaling menu.
If you want to descale later, press the "
machine.
Please note that not descaling your machine will ultimately make it stop working
properly. In this case repair is NOT covered under your warranty
Machine ready signals
Insert the drip tray with the coffee
grounds drawer into the machine
and close the service door.
Fill the coffee bean hopper.
Turn off the machine. After 30 seconds, turn it on again. Try this 2 or 3 times.
If the machine does not start, contact the Philips SAECO hotline in your
country and communicate the the Error-code which you see on the display.
You can fi nd its contact details in the warranty booklet by-packed separately
Exx
or on www.philips.com/support.
(RED colour)
03 USER INSTRUCTIONS
Prime the circuit.
" button to enter the
" button to continue using the
The brew group must be inserted
into the machine.
Empty the coffee grounds drawer.
Fill the water tank.
Page 06 / 13