Conventional Cruise Control
■ Increasing the set vehicle speed
●
Using the RES/+ switch
Pressing the RES/+ switch briefly
Every time you press the RES/+ switch, the
set vehicle speed will increase by 5 MPH (5
km/h).
Pressing the RES/+ switch continuously
While pressing the RES/+ switch, the set
vehicle speed will increase by 1 MPH (1
km/h).
When the switch is operated, the set vehicle
speed on the meter display will change.
●
Using the accelerator pedal
Operate the accelerator pedal to increase
the vehicle speed.
When the desired speed is reached, press
the SET/- switch. The vehicle speed is set
at the speed when the switch is pressed,
and the new set vehicle speed will be dis-
played on the meter display.
■ Decreasing the set vehicle speed
●
Using the SET/- switch
Pressing the SET/- switch briefly
Every time you press the SET/- switch, the
set vehicle speed decreases by 5 MPH (5
km/h).
Pressing the SET/- switch continuously
While pressing the SET/- switch, the set
vehicle speed decreases by 1 MPH (1
km/h).
When the switch is operated, the set vehicle
speed on the meter display will change.
70
S00822
S00818
S00818