About EyeSight
●
CRUISE indicator
These indicators are displayed when the main cruise control
: Adaptive Cruise Control (Adaptive Cruise Control indicator)
: Conventional Cruise Control (Conventional Cruise Control indicator)
* Refer to page 28.
●
SET indicator [Adaptive Cruise Control/Conventional Cruise Control]
is displayed when cruise control is set. When the vehicle stops, the indicator will blink
until the cruise control is cancelled.
* Refer to page 29.
●
READY indicator
is displayed when Adaptive Cruise Control can be set.
* Refer to page 28.
●
Lead vehicle indicator
When Adaptive Cruise Control is set, this indicator will be displayed when a vehicle in
front has been detected.
This indicator and the following distance setting indicator will blink in the following cases.
- The Lead Vehicle Start Alert is active.
- The Pre-Collision Braking System is active.
- The "brake more" warning is active.
- Pre-Collision Throttle Management is active.
These indicators also flash if, after Adaptive Cruise Control is set, it is automatically can-
celed because a vehicle in front of your vehicle is now out of the detectable range of the
EyeSight cameras.
* Refer to page 30.
●
Following distance setting indicator
(Following distance setting) Indicates the following distance setting that was set with
the following distance setting switch.
This indicator blinks in the following cases.
- The "brake more" warning is active.
- The Pre-Collision Braking System is active.
- Pre-Collision Throttle Management is active.
* Refer to page 36.
●
Set vehicle speed display
Displays the set vehicle speed.
* Refer to page 28.
●
*
SI-DRIVE
mode indicator
Indicates the current SI-DRIVE mode.
*
SI-DRIVE refers to SUBARU Intelligent Drive.
* Refer to page 19.
14
is pushed.