Subaru Forester EyeSight 2015 Owner's Manual page 36

Adaptive Cruise Control
■ Increasing the set vehicle target speed
●
Using the RES/+ switch
While driving with Adaptive Cruise Control on, operate the RES/+ switch as follows.
Push the RES/+ switch briefly.
Every time the switch is pushed, the set
vehicle target speed will increase in
increments of 5 MPH (5 km/h).
Push the RES/+ switch continuously.
While the switch is being pushed, the set
vehicle target speed will increase in
increments of 1 MPH (1 km/h).
When operating the switch, the set vehicle
target speed changes on the meter display
and the multi function display.
<Meter display>
MPH
miles
●
Using the accelerator pedal
Depress the accelerator pedal to increase the vehicle speed. Once the preferred speed
has been attained, push the SET/- switch. The set vehicle target speed is set to the vehi-
cle speed that is attained when the switch is pushed. The set vehicle target speed is dis-
played on the meter display and the multi function display.
32
<Multi function display>
S00890
S00822
S00891