Subaru Forester EyeSight 2015 Owner's Manual page 54

Pre-Collision Braking System
The Pre-Collision Braking System will not activate when the EyeSight warn-
ing light (
stops.
Neither primary Pre-Collision Braking nor secondary Pre-Collision Braking
will operate in the following conditions.
When the vehicle speed is approximately 1 MPH (1 km/h) or lower, or
approximately 100 MPH (160 km/h) or higher.
When the Vehicle Dynamics Control is functioning.
Pre-Collision Braking Assist operation
When the Pre-Collision Braking System is activated utilizing first braking or second braking
(when the system determines that there is a high risk of collision with an obstacle in front), if
the driver depresses the brake pedal, the system determines that this is emergency braking
and activates braking assist automatically.
If the driver depresses the brake pedal manually while following distance
warning is activated, the Pre-Collision Braking Assist will not work. (The
vehicle decelerates with the normal braking force operated by the driver.)
Pre-Collision Braking Assist function does not operate when the vehicle
speed is approximately 7 MPH (10 km/h) or less or 100 MPH (160 km/h) or
more.
For information about the braking assist function, refer to the Owner's
Manual for your vehicle.
50
CAUTION
) is illuminated or flashing, or when the EyeSight temporarily
NOTE
CAUTION
NOTE