Table of Contents
Advertisement
●
Selector indicator/shift position indicator
Displays the selector lever position or the selected gear position.
For turbo models, when the Adaptive Cruise Control / Conventional Cruise Control is set
while S# (Sports Sharp mode) of SI-DRIVE is selected, the display switches from the gear
position to the D position.
●
Lane indicator
When the Lane Departure Warning is activated, both the left and right indicators flash
simultaneously.
When the Lane Sway Warning is activated, the left and right indicators flash alternately.
* Refer to pages 58 and 61.
●
Steering wheel indicator
Flashes when the Lane Departure Warning or Lane Sway Warning is active.
* Refer to pages 58 and 61.
●
EyeSight temporary stop indicator
If a malfunction occurs in the EyeSight system, the Pre-Collision Braking System OFF
indicator light and the Lane Departure Warning OFF indicator light illuminate and a sym-
bol from "E1" to "E3" will be displayed on the meter display. However, when the main
cruise control is in the OFF position, the symbol will not be displayed.
When it is displayed, none of the EyeSight functions can be used except for Conventional
Cruise Control.
* Refer to page 77.
●
Customization display
The settings of the alarm volume, the lead vehicle acquisition sound and the lead vehicle
start alert function can be customized when all of the following conditions are met: the
engine is running, the main cruise control is in the OFF position and the selector lever is in
the P position.
* Refer to page 79.
●
EyeSight warning light
This indicator illuminates or flashes when a malfunction occurs in the EyeSight system.
It also illuminates when the ignition switch is turned to the ON position and then it turns off
approximately 5 seconds after the engine starts.
When it is illuminated or flashing, none of the EyeSight functions can be used (including
Adaptive Cruise Control and the Pre-Collision Braking System, etc.).
* Refer to page 76.
About EyeSight
15
Hide quick links:
Advertisement
Table of Contents
