Printer Does Not Print - Lanier 5222 Operator's Manual

Printer Does Not Print

Troubleshooting
Possible Cause
Is the power on?
Does the On Line
indicator stay on?
Does the Error indicator
stay red?
Is the paper set?
Is your specified paper
size correct?
Is your specified paper
type correct?
Can you print a
configuration page?
Is the network cable
between the machine
and your computer
connected securely?
Are you using a correct
network cable?
Did you connect the
interface cable after
turning on the main
switch?
Solutions
If not, confirm that the cord is securely plugged into the
power outlet and the machine.
Turn on the machine power.
If not, press [Online] to make it light up.
Press {Printer}.
If not, check the error message on the panel display and
take the required action.
Load paper into the paper tray.
Set the specified paper in any of the input trays.
Adjust the paper size dial to match the size and feed
direction of the paper in the paper tray.
Set the specified paper in any of the input trays.
Adjust the paper type to use the operation panel.
If you cannot print a configuration page, it probably
indicates printer malfunction. You should contact your
sales or service representative.
If you can print a configuration page but cannot get the
printer to print when you issue a print command from your
computer, it probably means there is a problem with your
computer.
Also keep it in mind that large, complex data might take
long time for printer process.
Connect the network cable correctly. If there are any
connectors or screws, confirm they are fastened securely.
The type of network cable you should use depends on your
computer. Be sure to use the correct one. See"Connecting
to the Printer" on page 1-1
If the cable is damaged or worn, replace it with new one.
Confirm of connecting the interface cable before turning on
the main switch.
Printer Does Not Print
6 - 11