Configuring The Printer For The Network - Lanier 5222 Operator's Manual

Configuring the Printer for the Network

After installing the optional network interface card, configure it for the network using the printer's
Control Panel.
The following table shows the operation panel settings and their default settings. These are
included in the "Main Menu".
Printer Configuration
Items
32 IP Address
33 Subnet Mask
34 Gateway Address
35 Access Control
(Access Control Address)
36 Access Mask
(Access Control Mask)
37 Network Boot
38 Frame Type(NW)
(Frame Type NetWare)
39 ActiveProtocols
1
Press [User Tools].
2
Press [4] on the number keys.
3
Press the Up or Down Arrow keys until the
following message appears.
4
Press [Enter #].
Configuring the Printer for the Network
Default
011.022.033.044
000.000.000.000
000.000.000.000
000.000.000.000
000.000.000.000
None
Auto Select
All Active
2 - 1