Lanier 5222 Operator's Manual page 113

Specifications
This section contains the electrical and hardware specifications for the printer, including the
information on the options.
Component
Resolution
Printing Speed
Parallel Interface
Printer Language
Fonts
Memory
Hard Disk
(option)
Operation System
Supported by this
printer
Network
(option)
Network Cable (option) 10BASE-T/100BASE-TX shielded twisted-pair (STP,
Specifications
Specification
600dpi; PCL 5e, PCL 6, PostScript 3
300dpi; PCL 5e, PostScript 3
22/27 * pages per minute
(A4<IconCo1>K, 8
11"<IconCo1>K)
Standard 36-pin printer cable and a parallel port on the host
computer.
IEEE1284B
Do not use a parallel cable that is longer than 3 meters (10
feet).
PCL 5e , PCL 6,
Post Script 3 (option)
PCL 5e, PCL 6
35 Intellifonts, 10 TrueType fonts, and 1 Bitmap font
Font Manager available.
PostScript
136 Adobe Type 1 fonts
Standard: 16MB
Optional Printer Feature Expander Type 185: Up to 80MB
Storage capacity: approximately. 1.6GB
Windows 95/98
Windows NT 4.0
Windows 3.1x
Macintosh 7.1 (required the optional PostScript 3 and
Network Interface Board Type 185)
Topology: Ethernet 10BASE-T/100BASE-TX
Protocol: TCP/IP, IPX/SPX, NetBEUI, AppleTalk
Category/Type5) cable.
•
* Printing Speed depends on using machine.
1
/ " <FmSymbol>¥
2
Specifications
9 - 1