Lanier 5222 Operator's Manual page 107

Windows NT 4.0
Windows 3.1x
PostScript3 Kit Type185
1
From an application, select the menu command to print.
•
The print dialog box appears.
2
Open the Printer Properties.
3
If you want to collate, select [Collate] from the [Page Setup] tab.
4
Click the [Advanced] tab.
5
From [Document Options], select the function you want to use.
•
The current setting is displayed in the [Change settings] box in the lower part of the
tab.
6
Use the [Change settings] box to select the appropriate setting.
7
Click [Apply] to apply the settings you made.
8
After making all of the settings you want, click [OK] to close the Printer Properties.
9
Start printing from the application's print dialog box.
1
From an application, select the menu command to print.
•
The print dialog box appears.
2
Open the Printer Setting dialog box.
3
Click the [Features] tab.
4
In the [Features] box, the available functions are displayed. Use the [Selection] list to
select the appropriate setting.
5
After making all of the settings you want, click [OK] to close the Printer Setting dialog box.
6
Start printing from the application's print dialog box.
Printing a Document
8 - 7