Setting Up An Internet Connection - Teltonika ModemCOM/G10 User Manual

ModemCOM-TM2

7.3 Setting up an Internet connection

In this chapter we will provide you with general information and procedures necessary for setting
up an Internet connection in your PC. When using "Modem Control Tool", the Internet connection
settings are determined automatically.
Before you begin make sure that:
• You have a GSM SIM card with activated data transfer service;
• "ModemCOM/G10" is ready to work – SIM card is pushed in, the device is correctly
connected to the PC, the drivers are properly installed;
• TCP/IP protocol is installed on your PC.
When you are using "ModemCOM/G10" you can get access to the Internet via one of this data
transmission types:
• GPRS packet data transfer. In this case you have to know "APN", "user name and
password";
• CSD data transfer. You have to know a phone number of a dial-up server.
If GPRS data transfer is used, you have to set up an APN, if needed, user name and password.
1) Start "Modem Control Tool". If needed the PIN code, enter it;
2) Click "Settings" button
3) Select "Connection";
4) Enter the APN;
5) Enter the Phone Number [*99#], if it is not entered automatically;
6) If needed, enter the User name and Password;
7) Click "Update".
Step 11 - Press "Finish" in the opened
dialog box "Modem Control tool Setup".
Congratulations the installation is done.
User' Manual v2.1.1.19
13