Modem Setup; Connecting To The Computer; Installation Of "Modem Control Tool - Teltonika ModemCOM/G10 User Manual

ModemCOM-TM2
7.

7.1 Connecting to the computer

1)
2)
3)
4)
5)
6)
7)

7.2 Installation of "Modem Control Tool"

Step 1 - Open the "ModemCOM/G10"
Pack, take only the CD and insert it into
the PC CD Drive.
Step 2 – Wait till the system displays the
screen "Select Setup Language".
Step 3 - Select English and Click "OK"
button.

MODEM SETUP

Turn OFF your computer
Insert the SIM card into modem. Follow the instructions on the device sticker. Make
sure, the SIM card is pushed inside till it fixes.
Plug DB9 connector of the serial (RS232) cable into the modem.
Plug another end of the serial cable to one of the COM ports of PC.
Plug in the AC/DC adapter to power supply socket of "ModemCOM/G10".
Plug in the AC/DC adapter to power supply network.
Turn ON your computer
Step 4 -Click "Install" button
User' Manual v2.1.1.19
10