Teltonika VRT014 Quick Start Manual

M E T H O D O F O P E R A T I O N
For the switching-on signal to be activated (the connection of internal relay contacts), the user
has to dial the device's SIM card number. After having received one or two calls, the device rejects it,
if the call matches one of the numbers available in the internal data base of the device. If the number
does not match, the device would not respond to calls.
The device rejects the switching-on signal either when the delay time runs out or when it
receives a signal due to activation of an external button or sensor, depending on the configuration of
the device.
When the device is operating, the list of numbers available in its memory may be edited by
means of SMS messages.
Note: the device responds SMS that come from the number which was entered at 0th position in the
internal data base of numbers.
I M P O R T A N T
The sign on the packaging means that the user's manual provided on a compact
disk must be read before using the product.
The sign on the packaging means that the electric and electronic equipment to be
utilised must be stored separately.
A N D L A S T ...
In case you have problems with the installation and use, please address them to the
Technical Assistance Department by e-mail support@teltonika.lt.
Thank you for purchasing our product. We hope this user-friendly device
will be helpful in realising your ideas and bringing comfort to your life. Please
take few minutes to read this manual before starting to work with VRT014. This
would make the installation and use of device easier.
Address: Saltoniškių g. 10c, Vilnius LT-08105,
Phone: (370-5) 2127472,
Fax: (370-5) 276 1380, Email:
4
Quick Start Guide V0.2
info@teltonika.lt
VRT014