Installing The Front Fork Legs - Yamaha YW125Y 2009 Service Manual

1
2
FRONT FORK
TIP
8 Install the spring with the smaller pitch fac-
ing down.
8 Before installing the collar, lubricate its O-
ring with grease.
8 Press down the collar/O-ring, adjust the
stopper ring so that it fits into the inner tube's
groove.
8. Install:
8 clamp/boot
EAS00663

INSTALLING THE FRONT FORK LEGS

The following procedure applies to both of the
front fork legs.
1. Install:
8 front fork leg
8 stopper ring 1
TIP
Pull up the inner tube until it stops, then install
the stopper ring.
2. Tighten:
8 lower bracket pinch bolt 2
26Nm (2.6m • kgf, 18.8ft • lbf)
3. Install:
8 front wheel
Refer to "FRONT WHEEL AND BRAKE
DISC".
8 brake caliper
8 brake hose holder 1
Refer to "FRONT BRAKE".
8 leg shield 1
Refer to "COVER AND PANEL" in chap-
ter 3.
4-48
CHAS