Table of Contents
Advertisement
INSTALLATION OVERVIEW – MASONRY FIREPLACES
HINT:
Close and seal the damper
to prevent air infiltration.
Use one of the rear screws
on the insert to secure the
included tie-down bracket to
the fireplace. Once in place,
secure the bracket to the
fireplace floor to prevent the
insert from tipping. Secure
brackets to both sides.
A Code-Conforming (jacketed, grounded) receptacle
may be placed within the fireplace. Do not place it above
the fireplace insert.
Cover plate is required if chimney
does not have suitable rain cap.
Attach the "This fireplace has been altered..." plate
to the fireplace (use two screws or other suitable
method). You may wish to place it in a location
where it will be covered by the surround glass.
The surround glass extends 1"
below the base of the insert.
Leveling Bolts
9
2" (50mm) Minimum
HINT:
Paint the interior of the
fireplace with latex paint to
prevent fireplace odors
from entering the home.
Advertisement
Table of Contents
