Details Of Diag Menu; Dsp Through - Yamaha AVR-S80 Service Manual

• Details of DIAG menu

With full-bit output specified in some modes, it is possible
to execute 0dBFS output without head margin in each
channel.

1. DSP THROUGH

Main DSP of YSS938 is selected for MAIN L/R output.
ANALOG BYPASS
• The signal for L/R is output as it is without passing
through the DSP section.
Reference data
INPUT: VIDEO 1 ANALOG
SWFR: 50Hz, Others: 1kHz
Input level Volume
Both ch, -20 dBV -10 dB
YSS 0dB
• The signal is output including the head margin.
Head margin:
Main L/R: 0dBFS, Center: 0dBFS,
RL/RR: -12dBFS, SWFR: Add L/R signal at -20dBFS.
Reference data
INPUT: VIDEO 1 ANALOG
SWFR: 50Hz, Others: 1kHz
Input level Volume
Both ch, -20 dBV -10 dB
YSS Front 0dB
• Not used in this model
YSS FULL BIT
• The signal is output in digital full bit without including
the head margin.
Reference data
INPUT: VIDEO 1 ANALOG
SWFR: 50Hz, Others: 1kHz
Input level Volume
Both ch, -20 dBV -10 dB
YSS FULL BIT F
• Not used in this model
6CH PRE OUT
FRONT L/R (1kHz) CENTER (1kHz)
- ∞
-15.5 dBV
6CH PRE OUT
FRONT L/R (1kHz) CENTER (1kHz)
-16.0 dBV -16.0 dBV
6CH PRE OUT
FRONT L/R (1kHz) CENTER (1kHz)
-16.0 dBV -16.0 dBV
RL/RR (1kHz) SUBWOOFER (50Hz)
- ∞ - ∞
RL/RR (1kHz) SUBWOOFER (50Hz)
-16.2 dBV -4.0 dBV
RL/RR (1kHz) SUBWOOFER (50Hz)
-16.2 dBV -4.0 dBV
AVR-S80/NX-SW80
21