Settings On The Set Up Menu; Common Procedures Of Settings; Language; Display - Yamaha DVX-S60 Owner's Manual

Once the following settings have been completed, the unit can always be operated under the same conditions.
The settings will be retained in the memory until they are changed, even if the power is turned off.
Common procedures of settings
1, Press the SET UP button in the stop mode. "SET UP MENU" appears on the TV screen.
_ Is_e:)k_r Pare_ntal
2. Press the A, I_, • or 41 button, then press the ENTER button to select the menu. Please refer to the on-screen instructions.
3. Press the SET UP button to quit this menu.
Example:
%
OSD:
AUDIO:
SUBTITLE:
DVD MENU:
ENGLISH
DISC, ENGLISH, SPANISH, FRENCH, OTHERS
DISC, ENGLISH, SPANISH, FRENCH, OTHERS
DISC, ENGLISH, SPANISH, FRENCH, OTHERS
(DISC: The first priority language recorded on the disc is
used.)
Note:
You cannot switch audio sound track languages if there is only one
language recorded on the disc.
When you play a DVD disc, the player automatically displays the pre-
selected subtitle language if it is included on the disc.
If"OTHERS"is selected, enter the language code. (See"LANGUAGE
CODE LIST" on Page 22.)
%
TV TYPE:
TV TYPE:
COMPONENT OUTPUT:
PROGRESSIVE MODE:
4:3 LB, 4:3 PS, 16:9
4:3 LB, 4:3 PS, 16:9
INTERLACE, PROGRESSIVE
AUTO, VIDEO, FILM
TV TYPE:
Select the appropriate setting for your TV screen size.
4:3 LB (Letterbex):
Select when a conventional TV set is
connected.
When the wide screen disc is played back,
the black bands appear at the top end bottom
of screen.
4:3 PS (Panscan):
Select when a conventional TV set is
connected.
When the wide screen disc is played back, it
displays pictures cropped to fill to your TV
screen. The left and right edges are cut off.
16:9:
Select when a wide screen TV set is
connected.
Played in "FULL" size. (Setting the wide
screen TV to "FULL" mode is also necessary.)
Cut off
Note:
The screen size may differ depending on the DVD video discs.
If you select 16:9 to get rid of the black bands on screen when wide
screen disc is played back, picture may be slightly distorted.
In some discs, even if 4:3 PS is selected, the black bands may remain
on the screen.
COMPONENT OUTPUT:
If you use a conventional TV and connect it to the COMPONENT VIDEO
OUT jacks (see page 10), select "INTERLACE".
If you use e TV with progressive-scan capability and connect it to the
COMPONENTVIDEOOUTjacks(seepage l l ),select"PROGRESSWE".
Note:
If the VIDEO OUT SELECT and VIDEO OUT SCAN S ELECT switches
are not correct position, you cannot select "COMPONENT OUTPUT:
PROGRESSIVE".
If you select"CONPONENT OUTPUT: PROGRESSIVE" when using
a conventional TV, the TV screen is disturbed. In this case, turn off the
power, and then set the VIDEO OUT SCAN switch to the INTERLACE
position.
PROGRESSIVE MODE:
When "COMPONENT OUTPUT: PROGRESSIVE" is selected as above,
select "AUTO", "VIDEO" or "FILM".
AUTO:
It automatically selects the VIDEO (Video source) or FILM (Film source)
according to the played disc. Normally, select this mode.
VIDEO (Video source):
Major DVD-Video sources consist of video sources end film sources.
Select when playing a DVD video disc recorded with a video source or TV
program like drama, animation, etc. (36 frames per second, 60 fields).
FILM (Film source):
Major DVD-Video sources consist of video sources end film sources,
Select when playing a DVD video disc recorded with a movie film (24
frames per second).
Note:
Initial setting is "AUTO".
If picture flickering occurs at "AUTO" mode, select "VIDEO" or "FILM".
E-16