Yamaha AVR-S80 Service Manual
Hide thumbs Also See for AVR-S80:

Advertisement

Avr-S80/NX-SW80
The AVX-S80 is composed of the AVR-S80 and the NX-SW80.
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.
WARNING:
IMPORTANT:
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and
service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable
and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please
contact the distributor's Service Division.
WARNING:
IMPORTANT:
I CONTENTS
To Service Personnel .......................................... 2
Front Panels ........................................................ 3~4
Remote Control Panels ...................................... 5
Rear Panels .......................................................... 5~7
Specifications ...................................................... 8~9
Internal View ......................................................... 10
AVR-S80 DISASSEMBLY PROCEDURE /
AVR-S80
................................................. 11~13
Sw-S80 DISASSEMBLY PROCEDURE /
SW-S80
1 0 0 8 1 1

HOME THEATER SYSTEM

SERVICE MANUAL
IMPORTANT NOTICE
Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons,
we advise all YAMAHA product owners that any service required should be performed by an authorized
YAMAHA Retailer or the appointed service representative.
The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
..................... 3
Display Data ..................................................... 34~35
Ic Data ................................................................. 36~41
Block Diagram ................................................. 42~45
PRINTED CIRCUIT BOARD .................................. 46~53
Pin Connection Diagram .................................... 54
Schematic Diagram ........................................ 55~60
Parts List ........................................................... 61~82
Remote Control .............................................. 83~84
Parts List For Carbon Resistors ................................ 85
14~15
16~33
P.O.Box 1, Hamamatsu, Japan

Advertisement

Table of Contents
loading

Summary of Contents for Yamaha AVR-S80

  • Page 1: Home Theater System

    This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore not been restated.
  • Page 2: To Service Personnel

    AVR-S80/NX-SW80 I TO SERVICE PERSONNEL AC LEAKAGE WALL EQUIPMENT TESTER OR 1. Critical Components Information OUTLET UNDER TEST EQUIVALENT Components having special characteristics are marked s and must be replaced with parts having specifications equal to those originally installed. 2. Leakage Current Measurement (For 120V Models Only)
  • Page 3: Front Panels

    AVR-S80/NX-SW80 I SYSTEM COMPOSITION / I FRONT PANELS AVR-S80 (U, C, A, R, T, K models) AVR-S80 (B, G models)
  • Page 4 AVR-S80/NX-SW80 AVR-S80 (J model) Subwoofer SW-S80 Satellite Speaker NX-S80S Center Speaker NX-S80C...
  • Page 5 AVR-S80/NX-SW80 I REMOTE CONTROL PANELS U, C, A, R, T, K, J models B, G models I REAR PANELS AVR-S80 (U, C, A, B, G models) AVR-S80 (R, T, K models) AVR-S80 (J model)
  • Page 6 AVR-S80/NX-SW80 Subwoofer SW-S80 (U, C models) Subwoofer SW-S80 (A model) Subwoofer SW-S80 (B, G models) Subwoofer SW-S80 (R model) Subwoofer SW-S80 (T model) Subwoofer SW-S80 (K model)
  • Page 7 AVR-S80/NX-SW80 Subwoofer SW-S80 (J model) Center Speaker NX-S80C Satellite Speaker NX-S80S...
  • Page 8: Specifications

    DVD, VCR, VIDEO1, VIDEO2 ......... 95dB or more Type G Video Section (Magnetic -Shielding Type) Video Signal Type SW-S80 ....Advanced Yamaha Active Servo Technology .................. NTSC or PAL NX-S80C ............Acoustic suspension Video Signal Level NX-S80S ............Acoustic suspension ................
  • Page 9 R ..General model T ..Chinese model K ..Korean model J ... Japanese model “DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc. • AVR-S80 • SW-S80 435 (17-1/8") 200 (7-7/8") 416 (16-3/8") Unit : mm (inch) Unit : mm (inch) •...
  • Page 10 AVR-S80/NX-SW80 I INTERNAL VIEW • AVR-S80 1 MAIN (2) P.C.B. 2 MAIN (1) P.C.B. 3 SUB (3) P.C.B. 4 DSP P.C.B. 5 TUNER 6 SUB (4) P.C.B. 7 SUB (2) P.C.B. 8 SUB (1) P.C.B. • SW-S80 1 POWER AMP (3) P.C.B.
  • Page 11 AVR-S80/NX-SW80 I AVR-S80 DISASSEMBLY PROCEDURE AVR-S80 (Remove parts in the order as numbered.) Disconnect the power cord from the AC outlet. 1. Removal of Top Cover a. Remove 4 screws (1) and 5 screws (2). (Fig. 1) b. Slide the Top Cover rearward to remove it. (Fig. 1) 2.
  • Page 12 AVR-S80/NX-SW80 3. Removal of SUB (3) P.C.B. a. Remove 4 screws (5). (Fig. 3) b. Remove CN1, CB3, CB4, CB302. (Fig. 4) c. Remove the SUB (3) P.C.B.. (Fig. 4) 4. Removal of Tuner a. Remove 3 screws (6). (Fig. 3) b.
  • Page 13 AVR-S80/NX-SW80 6. Removal of MAIN (1) P.C.B. a. Remove 4 screws (B) and 2 screws (C). (Fig. 3) b. Remove 2 screws (D) and 2 screws (E). (Fig. 5) c. Remove the MAIN (1) P.C.B.. (Fig. 5) MAIN (1) P.C.B.
  • Page 14 AVR-S80/NX-SW80 I SW-S80 DISASSEMBLY PROCEDURE SW-S80 (Remove parts in the order as numbered.) Disconnect the power cord from the AC outlet. 1. Removal of Grille Assembly a. Insert the tip of flat tip (-) screwdriver to the slot on the bottom.
  • Page 15 Using the system connection cable (DIN 13P) supplied with the unit, connect the system connector terminal of the AVR-S80 and that of the SW-S80. b. Connect the power cords of the AVR-S80 and SW-S80 to the service outlet. c. Press the STANDBY/ON button of the AVR-S80.
  • Page 16 AVR-S80/NX-SW80 I DSP SELF DIAGNOSIS FUNCTION (DIAG) There are 15 DIAG menu items, each of which has sub- menu items. Listed in the table below are menu items and sub-menu items. No DIAG menu sub-menu DSP THROUGH 1. ANALOG BYPASS 2.
  • Page 17 AVR-S80/NX-SW80 No DIAG menu sub-menu 19. YSS938-2 (5 Byte) (Not used in this model) 20. YSS938-3 (4 Byte) (Not used in this model) 21. CS49329 (3 Byte) (Not used in this model) 22. Mute Trigger (5 Byte) (Not used in this model) 12 DSP RAM CHECK 1.
  • Page 18 AVR-S80/NX-SW80 CAUTION! Using this product with the protection function disabled may cause damage to itself. Use special care for this point when using this mode. • Canceling DIAG [1] Before canceling DIAG, execute setting for PRESET of DIAG menu No.9 (Memory initialization inhibited or Memory initialized).
  • Page 19 AVR-S80/NX-SW80 Note) • Applying the power to a unit without correcting the abnormality can be dangerous and cause additional circuit damage. • The output transistors in each amplifier channel should be checked for damage before applying any power. • Amplifier current should be monitored by measuring across the emitter resistors for each channel.
  • Page 20 AVR-S80/NX-SW80 • Operation procedure of DIAG menu and SUB-MENU There are 15 MENU items, each of which has some SUB- MENU items. DIAG menu selection Main unit: Select the menu using (Forward) and (Reverse) keys of PRESET/TUNING. Remote control unit: Select the menu using (Forward) (Reverse) keys.
  • Page 21 AVR-S80/NX-SW80 • Details of DIAG menu With full-bit output specified in some modes, it is possible to execute 0dBFS output without head margin in each channel. 1. DSP THROUGH Main DSP of YSS938 is selected for MAIN L/R output. ANALOG BYPASS •...
  • Page 22 AVR-S80/NX-SW80 DSP THROUGH ~ YSS (Analog/PCM) CS49329 Analog Main DSP Sub DSP C/SW L/(L+R)/2 Through Through Digital RL/RR YSS938 (Shaded items not used in this example) 2. RAM THROUGH This function is for YSS938 only. Only the CT signal is output through the Sub DSP - DRAM.
  • Page 23 AVR-S80/NX-SW80 3. PRO LOGIC The L/C/R/RL/RR signals undergo the Pro-Logic processing and C/RL/RR signals are output through Sub DSP-DRAM. Main DSP is selected for MAIN L/R output. Using the sub-menu, it is possible to select PRO LOGIC I, II (Movie). The Auto Input Balance function is always off.
  • Page 24 AVR-S80/NX-SW80 4. SPEAKERS SET The input signal is automatically identified and switched in the priority order of dts → DOLBY DIGITAL → AAC → PCM AUDIO → Analog (A/D) according to the signal detection. The signals output from the DSP block are the same as 1.
  • Page 25 AVR-S80/NX-SW80 5. MARGIN CHECK The signal is output including the head margin. MAIN 12dB MARGIN Reference data INPUT: VIDEO 1 ANALOG SWFR: 50Hz, Others: 1kHz 6CH PRE OUT Input level Volume FRONT L/R (1kHz) CENTER (1kHz) RL/RR (1kHz) SUBWOOFER (50Hz) - ∞...
  • Page 26 AVR-S80/NX-SW80 6. OTHER INPUT Not used in this model. EXTERNAL DECODER 7. DISPLAY CHECK This program is used to check the FL display section. The display condition varies as shown below according to the sub-menu operation. The signals are processed using EFFECT OFF (The L/R signal is output using ANALOG MAIN BYPASS.)
  • Page 27 AVR-S80/NX-SW80 8. MANUAL TEST The noise generator built into the DSP outputs the test noise through the channels specified by the sub-menu. The noise frequency for LFE is 35 to 250 Hz. Other than that, the center frequency is 800Hz.
  • Page 28 AVR-S80/NX-SW80 • PRESET STATIONS / STATION FM FACTORY PRESET DATA (MHz) STATION AM FACTORY PRESET DATA (kHz) PAGE NO. U, C R, A, B, G PAGE NO. U, C, R A, B, G 87.5 87.50 76.0 90.1 90.10 83.0 1080...
  • Page 29 AVR-S80/NX-SW80 11. IF STATUS (Input function status) Using the sub-menu, the status data is displayed one after another in the hexadecimal notation. During signal processing, the status before execution of this menu is maintained. * Numeric values in the figure example are for reference.
  • Page 30 AVR-S80/NX-SW80 <5th byte> Signal processing status information *2: With digital signals other than 32kHz, 44.1kHz and 48kHz, through processing method is used for reproducible signals. bit7 MUTE request bit3 – bit6 Red dts flashing bit2 Through & bypass (*2) bit5 6.1/ES processing...
  • Page 31 AVR-S80/NX-SW80 MTT: Mute Trigger (Not used in this model) Byte No. Function Mute condition Factor of the last mute Error count of YSS938-FSCNT Mute count by YSS938-FSCNT Error factor of down load of CS49329 12. DSP RAM CHECK This menu is used to self-diagnose whether or not the bus connection for the YSS938 and the external RAM is made properly.
  • Page 32 AVR-S80/NX-SW80 TUNER DESTINATION: J, UC, ALG or R can be confirmed. TUNER: NOT or EXIST can be confirmed. RDS: NOT or EXIST can be confirmed. VIDEO FORMAT: NTSC or PAL can be confirmed. 14. MICROPROCESSOR INFORMATION The version, checksum and the port specified by the microprocessor are displayed.
  • Page 33 AVR-S80/NX-SW80 15. ROM CORRECTION / CHECK SUM Soft Date / Rom Correction Exit, Not / (Not used in this model) / Rom Correction Check Sum Display / (Not used in this model) / Rom Correction Remote Control Receive (Not used in this model) / Remote Control Code Display / Remote control received code can be checked.
  • Page 34 AVR-S80/NX-SW80 I DISPLAY DATA V400: 16-BT-99GNK (V8558700) PATTERN AREA G PIN CONNECTION Pin No. Connection Pin No. Connection Note : 1) F1, F2 ..Filament 2) NP ..No pin 3) NX ..No extened 4) DL ..Datum Line 5) 1G ~ 16G ..
  • Page 35 AVR-S80/NX-SW80 G ANODE CONNECTION 13G~1G – – – – – – – – – – – – – – – – – – – – – – – – – – –...
  • Page 36 AVR-S80/NX-SW80 I IC DATA IC1: M30624FGAFP (MAIN P.C.B.)
  • Page 37 AVR-S80/NX-SW80 IC1: M30624FGAFP (MAIN P.C.B.) KEY input (A-D) Pull-up resistance 10 k-ohms Ω +1.2k +1.2k +1.8k +2.7k +3.3k +4.7k +8.2k 0~0.25 ~0.75 ~1.25 ~1.75 ~2.25 ~2.75 ~3.25 ~3.75 KEY 0 A/B/C/D/E VOLUME– VOLUME+ NO KEY NO KEY INPUT STEREO (92 pin)
  • Page 38 AVR-S80/NX-SW80 IC600 : YSS938 (DSP P.C.B.) RAMA9 RAMA3 SELI1 RAMA4 SELI0 SELI9 SELOA SELI10 SELOB SELI11 TESTMS SELI12 TESTXEN SELI13 IPORT0 RAMA2 IPORT1 RAMA5 IPORT2 RAMA1 IPORT3 RAMA6 IPORT4 RAMA0 DDIN0 RAMA7 DDIN1 RAMA8 DDIN2 VDD1 DDIN3 RASN RAMOEN YSS938...
  • Page 39 AVR-S80/NX-SW80 IC600 : YSS938 (DSP P.C.B.) Name Function Crystal oscillator connecting terminal Crystal oscillator connecting terminal (24.576MHz ) SELI1 Built-in selector input 1 (AXD) SELI0 Built-in selector input 0 (GND) SELOA Built-in selector output A (ISEL) SELOB Built-in selector output B...
  • Page 40 AVR-S80/NX-SW80 IC600 : YSS938 (DSP P.C.B.) Name Function SDWCKI1 Word clock input terminal for SDIB, SDOB interface (Unconnected) SDBCKI1 Bit clock input terminal for SDIB, SDOB interface (Unconnected) Ground terminal SDOB3 PCM output terminal from Sub DSP SDOB2 PCM output terminal from Sub DSP...
  • Page 41 AVR-S80/NX-SW80 IC600 : YSS938 (DSP P.C.B.) Name Function RAMA5 Sub DSP: External memory address terminal 5 RAMA2 Sub DSP: External memory address terminal 2 SELI13 Built-in selector input 13 (Unconnected) SELI12 Built-in selector input 12 SELI11 Built-in selector input 11 (Unconnected)
  • Page 42 AVR-S80/NX-SW80 I BLOCK DIAGRAM AVR-S80 (1/3) See page 57 PCB SUB (4) See page 56 Front Input PHONE_DET MAIN See page 55 SCHEMATIC DIAGRAM JK501 NJM2068MD NJM2068MD BA15218F NJM2068MD NJM2068MD SP-RY2 BA15218F NJM2068MD NJM2068MD COM1 NJM2068MD NJM2068MD COM3 NJM2068MD COM1...
  • Page 43 AVR-S80/NX-SW80 I BLOCK DIAGRAM AVR-S80 (2/3) See page 56 SCHEMATIC DIAGRAM See page 55...
  • Page 44 AVR-S80/NX-SW80 I BLOCK DIAGRAM AVR-S80 (3/3) MAIN See page 55 SCHEMATIC DIAGRAM Bass Boost PRE_MUTE MUTE HP_DET SW_DET SW_PRT SW_ON SP-RY1 SP-RY2 See page 57 DSEL SW_ON See page 57...
  • Page 45 AVR-S80/NX-SW80 I BLOCK DIAGRAM See page 58~60 SCHEMATIC DIAGRAM SW-S80 RY401 F401 JUCAGB S401 F402...
  • Page 46 AVR-S80/NX-SW80 I AVR-S80 PRINTED CIRCUIT BOARD (Foil side) 6CH PREOUT VIDEO 1, MAIN (1) P. C. B. DVD/CD IN IN, OUT FRONT REAR CENTER, R, T, K models only L, R L, R SUBWOOFER (Lead Type Device) SYSTEM VOLTAGE SELECTOR...
  • Page 47 AVR-S80/NX-SW80 I AVR-S80 PRINTED CIRCUIT BOARD (Foil side) MAIN (1) P. C. B. (Surface Mount Device) Circuit No. U, C A, B, G R, T, K C160 J100, J101 R157 X: NOT USED O: USED / APPLICABLE • Semiconductor Location Ref.
  • Page 48 AVR-S80/NX-SW80 • Semiconductor Location I AVR-S80 PRINTED CIRCUIT BOARD (Foil side) Circuit No. U, C, R, A, B, G C658, 661, 666 J601 Ref. No. Location R653, 656, 657, 659, 660, 662 D608 R668 MAIN (1) D609 X: NOT USED...
  • Page 49 AVR-S80/NX-SW80 • Semiconductor Location I AVR-S80 PRINTED CIRCUIT BOARD (Foil side) Circuit No. U, C, R, A, B, G C658, 661, 666 J601 Ref. No. Location R653, 656, 657, 659, 660, 662 D604 R668 D605 (Surface Mount Device) X: NOT USED DSP P.
  • Page 50 AVR-S80/NX-SW80 I AVR-S80 PRINTED CIRCUIT BOARD (Foil side) MAIN (1) SUB (1) P. C. B. (Lead Type Device) VOLUME + SGND SGND REMOTE STEREO INPUT INPUT MODE STANDBY SGND SUB (2) VOLUME - PRESET/TUNING PRESET/BAND A/B/C/D/E AUTO/MAN'L MEMORY SUB (1) P. C. B.
  • Page 51 AVR-S80/NX-SW80 I AVR-S80 PRINTED CIRCUIT BOARD (Foil side) SUB (2) P. C. B. (Lead Type Device) SUB (3) P. C. B. (Lead Type Device) VCR IN, OUT VIDEO 1, DVD/CD IN Writer : B, G models only MONITOR OUT VIDEO...
  • Page 52 AVR-S80/NX-SW80 I SW-S80 PRINTED CIRCUIT BOARD (Foil side) POWER AMP (1) P. C. B. (Lead Type Device) POWER AMP (2) P. C. B. (Lead Type Device) POWER (3) Woofer POWER (4) POWER (4) POWER (3) POWER (3) POWER (4) • Semiconductor Location Ref.
  • Page 53 AVR-S80/NX-SW80 I SW-S80 PRINTED CIRCUIT BOARD (Foil side) POWER AMP (3) P. C. B. (Lead Type Device) POWER AMP (4) P. C. B. (Lead Type Device) SPEAKERS CENTER CENTER FRONT R FRONT L REAR L SYSTEM CONNECTOR AMPG POWER (1)
  • Page 54 AVR-S80/NX-SW80 I PIN CONNECTION DIAGRAM • ICs • Diodes 1N4002S 1SS355 S1NB20 µPC29M33T-E1 NJM78L05A-T3 NJM7805FA NJM79M05FA PQ025EZ5MZP 1SS380 Anode NJM78M05FA NJM79M12FA MA8051-M Anode NJM78M12FA MA8056-M MA8062-H – MA8062-M Cathode MA8075-M Cathode MA8110-L 3: IN 3: OUT RB501V-40 3: IN 3: COM...
  • Page 55 AVR-S80/NX-SW80 AVR-S80 SCHEMATIC DIAGRAM (MAIN) Page 57 Page 57 Page 56 * J5 is used when changing connection of DGND. to SUB (3) to SUB (4) to DSP FRONT L VOLUME CONTROL 11.8 SELECTOR -12.0 11.4 11.8 -11.9 DVD/CD L (ANALOG IN) SELECTOR -11.9...
  • Page 56 AVR-S80/NX-SW80 AVR-S80 SCHEMATIC DIAGRAM (DSP) Page 55 to MAIN (1) IC602: PQ025EZ5MZP Regulator EUROPEAN IC603: µPC29M33T-E1 REGULATOR Voltage Regulator INPUT Safety Drive Limiter Amp. OUTPUT DVD/CD L (ANALOG IN) IC601: MSM514260C-60JS 4Mbit DRAM 4M DRAM Excessive Electric Current Protection Timing...
  • Page 57 AVR-S80/NX-SW80 AVR-S80 SCHEMATIC DIAGRAM (SUB) IC300: NJM2595D IC301: LC72722 IC400: LC75712E FLD Video Switch RDS Decoder FL Display Driver Vin1 VDDA CLOCK VDDD RECOVERY REFERENCE (57kHz) (1187.5Hz) VOLTAGE SHIFT REGISTER Vin2 VSSA VSSD 75ohm Vout1 VREF 57kHz ANTIALIASING SMOOTHING DATA...
  • Page 58 AVR-S80/NX-SW80 SW-S80 SCHEMATIC DIAGRAM 1/3 (5ch AMP Block) REAR L POWER AMP (1) 26.2 30.7 11.7 30.4 -0.2 -11.9 -11.8 -0.2 30.3 -0.2 -11.8 30.3 -0.2 FRONT L 26.3 30.7 -0.1 30.4 -11.8 -0.1 -27.6 -26.3 30.3 -0.1 -11.8 30.3 -11.9...
  • Page 59 AVR-S80/NX-SW80 I SW-S80 SCHEMATIC DIAGRAM 2/3 (Woofer Amp Block) POWER AMP(2) 21.9 11.4 32.2 11.4 12.0 12.0 32.2 11.7 -1.2 -32.3 -31.9 11.7 11.7 11.7 -0.1 -0.1 -11.8 -11.8 -0.1 -11.8 -0.4 # All voltages are measured with a 10MΩ/V DC electric volt meter.
  • Page 60 AVR-S80/NX-SW80 I SW-S80 SCHEMATIC DIAGRAM 3/3 (Power Supply Block) SPEAKERS POWER AMP(3) REAR L CENTER FRONT L CENTER REAR L FRONT L Page 58 from POWER AMP (1) Page 59 from POWER AMP (2) Page 59 Page 59 Page 58...
  • Page 61: Parts List

    AVR-S80/NX-SW80 PARTS LIST I ELECTRICAL PARTS I WARNING Components having special characteristics are marked s and must be replaced with parts having specifications equal to those originally installed. Carbon resistors (1/6W or 1/4W) are not included in the ELECTRICAL PARTS List. For the parts No. of the carbon resistors, refer to last page.
  • Page 62 AVR-S80/NX-SW80 AVR-S80 P.C.B. MAIN ✻ New Parts...
  • Page 63 AVR-S80/NX-SW80 AVR-S80 P.C.B. MAIN ✻ New Parts...
  • Page 64 AVR-S80/NX-SW80 AVR-S80 P.C.B. MAIN ✻ New Parts...
  • Page 65 AVR-S80/NX-SW80 AVR-S80 P.C.B. MAIN ✻ New Parts...
  • Page 66 AVR-S80/NX-SW80 AVR-S80 P.C.B. MAIN ✻ New Parts...
  • Page 67 AVR-S80/NX-SW80 AVR-S80 P.C.B. MAIN & P.C.B. DSP ✻ New Parts...
  • Page 68 AVR-S80/NX-SW80 AVR-S80 P.C.B. DSP ✻ New Parts...
  • Page 69 AVR-S80/NX-SW80 AVR-S80 P.C.B. DSP ✻ New Parts...
  • Page 70 AVR-S80/NX-SW80 AVR-S80 P.C.B. DSP & P.C.B. SUB ✻ New Parts...
  • Page 71 AVR-S80/NX-SW80 AVR-S80 P.C.B. SUB ✻ New Parts...
  • Page 72 AVR-S80/NX-SW80 AVR-S80 P.C.B. SUB ✻ New Parts...
  • Page 73 AVR-S80/NX-SW80 AVR-S80 Chip Resistors ✻ New Parts...
  • Page 74 AVR-S80/NX-SW80 SW-S80 P.C.B. POWER AMP ✻ New Parts...
  • Page 75 AVR-S80/NX-SW80 SW-S80 P.C.B. POWER AMP ✻ New Parts...
  • Page 76 AVR-S80/NX-SW80 SW-S80 P.C.B. POWER AMP ✻ New Parts...
  • Page 77 AVR-S80/NX-SW80 SW-S80 P.C.B. POWER AMP SW-S80 P.C.B. POWER AMP ✻ New Parts ✻ New Parts...
  • Page 78 AVR-S80/NX-SW80 I AVR-S80 EXPLODED VIEW I AVR-S80 MECHANICAL PARTS 1-22 1-21 4 (1) 1-14 1-22 1-22 1-23 1-12 1-21 1-16 1-13 1-17 1-11 1-14 200-1 ✻ New Parts...
  • Page 79 AVR-S80/NX-SW80 ✻ New Parts...
  • Page 80 AVR-S80/NX-SW80 I NX-SW80 EXPLODED VIEW 2-10 2-15 2-10 2-7-5 2-7-6 2-12 2-11 2-13 2-7-4 2-7-6 2-11 2-17 2-18 2-18 2-17...
  • Page 81 AVR-S80/NX-SW80 I NX-SW80 MECHANICAL PARTS ✻ New Parts...
  • Page 82 AVR-S80/NX-SW80 ✻ New Parts...
  • Page 83: Schematic Diagram

    AVR-S80/NX-SW80 I REMOTE CONTROL RRC4001-0303L (U, C, A, R, T, K, J models) RRC4001-0304L (B, G models) G SCHEMATIC DIAGRAM P0D2 P1A2 P0D3 P0D1 P1B0/INT P0D0 P0E0 P0C3 P0E1 P0C2 2Ω (1/4W) P0E2 P0C1 SID303C-01 P0E3 P0C0 22Ω P0B3 2SC3265-Y P0B2 3.0V...
  • Page 84 AVR-S80/NX-SW80 CODE Function TUNER POWER on/off – – – 78-0F – SLEEP – – – 78-4F – AV POWER – B000-3D 57-02 – – TV POWER TV common key 47-02 TUNER – – – 78-4B – TV VOL + TV common key...
  • Page 85 AVR-S80/NX-SW80 Parts List for Carbon Resistors Value 1/4W Type Part No. 1/6W Type Part No. Value 1/4W Type Part No. 1/6W Type Part No. 1.0 Ω 3100 3100 10 kΩ 7100 7100 HJ35 HF85 HF45 HF45 1.8 Ω ❊ 3180 11 kΩ...
  • Page 86 AVR-S80/NX-SW80...

This manual is also suitable for:

Avr-nx-sw80

Table of Contents

Save PDF