I SW-S80 DISASSEMBLY PROCEDURE SW-S80
(Remove parts in the order as numbered.)
Disconnect the power cord from the AC outlet.
1. Removal of Grille Assembly
a. Insert the tip of flat tip (-) screwdriver to the slot on the
Push up the Grille Assembly by applying force to the
screwdriver. (Fig. 7)
b. Keep pushing up the Grille Assembly gradually until it
can be removed. (Fig. 7)
* The Grille Assembly is fixed securely at 6 dowels.
When removing it, use care not to cause a scratch or
any damage to the main unit.
When reinstalling it, apply quick-drying type bond to the
dowels of the Grille Assembly and fit it in place
securely. (If it is only pushed in, it will come off easily.)
2. Removal of Top Amplifier Unit
Remove 14 screws (G) and then remove the Amplifier
Unit. (Fig. 8)
Front Grill Assembly