Installing A Virtual Ta Client; Configuring A Virtual Ta Client/Server - D-Link DI-304 User Manual

Hide thumbs Also See for DI-304:

Table of Contents

DI-304/DI-304M ISDN Remote Router

Installing a Virtual TA Client

The Virtual TA application is a client/server model. You must set it up on both ends to

operate your Virtual TA application.

By default, the Virtual TA server is enabled and the username and password fields are

blank. Any Virtual TA client may login to the server. Once a single Username and

Password field has been filled, the Virtual TA server will only allow clients with a valid

username and password to login.

Insert the CD-ROM supplied with your DI-304, or directly double-

click the installer file. Vsetup95.exe is for Windows 95 OSR2.1 or

higher. Vsetup98.exe is for Windows 98, 98SE, and Me.

Vsetup2k.exe is for Windows 2000.

Follow the on screen instruction of the installer. The last step requires

you to restart your computer. Click OK to restart.

After the computer restarted, you will see a VT icon on the taskbar

(usually in the bottom-right of the screen, near the clock). When the

icon text is green, the Virtual TA client is connected to the Virtual TA

server and you can launch your CAPI-based software to use the

client to access the router. Read your software user guide for detailed

configuration. If the icon text is red, it means the client lost the

connection with the server. Check the physical Ethernet connection.

Table of Contents