D-Link DI-304 User Manual page 81

Hide thumbs Also See for DI-304:

Table of Contents

ISDN/PPPoE/PPTP Diagnostics

♦

Refresh – To obtain the latest information, click here to reload the page.

ISDN

♦

ISDN Link Status – If the link is active, this field will show

down

shows

♦

Dial ISDN – Clicking here causes the router to dial to the preset ISP. Click

Internet Access Setup → Dial to a Single ISP to configure dial-up settings.

♦

Activity – Displays the connection name for each B channel. If the B channel is

idle, it will show Idle.

? Drop B1 - Click to disconnect the B1 channel.

? Drop B2 - Click to disconnect the B2 channel.

Broadband Access

♦

Broadband Access Mode/Status – Displays the broadband access mode

and status. If the broadband connection is active, it will show PPPoE, PPTP,

or Static IP depending on which access mode is enabled. If the connection is

idle, it will show "- - -".

♦

WAN IP Address – The WAN IP address for the active connection.

♦

Dial PPPoE or PPTP – Click to force the router to establish a PPPoE or

PPTP connection.

♦

Drop PPPoE or PPTP – Click to force the router to disconnect the current

active PPPoE or PPTP connection.

Triggered Dial-out Packet Header

. Otherwise, it

Table of Contents