ISDN Dial Backup Setup
PPP Setup
Using a Static IP with a DSL/Cable Modem
Select this access mode if you receive a fixed public IP address or a public subnet from
your DSL or Cable ISP. In most cases, a Cable ISP will provide a fixed public IP, while a
DSL ISP will provide a public subnet. You must enable IP Routing Usage, and enter the
fixed public IP or choose one public IP from the public subnet for Ethernet TCP/IP Setup.
♦
ISP Name – Enter the ISP name.
♦
Username – Enter the ISP supplied username.
♦
Password – Enter the ISP supplied password.
♦
Scheduler (1-15) – Enter up to 4 index numbers for calls that have been
previously configured on the Call Schedule Setup windows (under Advanced
Setup).
♦
Dial Backup Mode – Select None to disable this feature or select Packet
Trigger to activate this feature.
♦
PPP Authentication – Select PAP or CHAP for widest compatibility.
♦
Idle Timeout – Idle timeout means the router will disconnect after being idle
for a preset amount of time. The default is 180 seconds. If you set the time to 0,
the PPP session will not terminate itself.
♦
Fixed IP – Check No (Dynamic IP) unless your ISP has provided you with a
static IP address.
♦
Fixed IP Address – If your ISP has provided you with a static IP address
enter it here.
35
DI-304/DI-304M ISDN Remote Router