D-Link DI-704P Quick Installation Manual
Hide thumbs Also See for DI-704P:

Advertisement

This product can be set up using any current
web browser, i.e., Internet Explorer 5x,
Netscape Navigator 4x.

Before You Begin

1. If you purchased this router to share your high-speed Internet connection with
other computers, you must have an Ethernet-based Cable/DSL modem with an
established Internet account from an Internet Service Provider (ISP).
2. It's best to use the same computer that is connected to your modem for
configuring the DI-704P router. The DI-704P Router acts as a DHCP server and
will assign all the necessary IP address information on your network. See
Appendix at the end of this Quick Installation Guide or the Manual on the
CD-ROM for setting each network adapter to automatically obtain an IP
address.

Check Your Package Contents

These are the items included with your DI-704P purchase:
If any of the above items are missing, please contact your reseller.
©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective
holders. Software and specifications subject to change without notice. DI-604.05082002
• DI-704P Ethernet Broadband Router
• CD-ROM (containing Manual and Warranty)
• Ethernet (CAT5 UTP/Straight-Through) Cable
• 5V DC, 2A Power Adapter
DI-704P
Express EtherNetwork™
Broadband Router
Using a power
supply with a
different voltage rating
will damage and void
the warranty for this
product.

Advertisement

Table of Contents
loading

Summary of Contents for D-Link DI-704P

  • Page 1: Before You Begin

    If any of the above items are missing, please contact your reseller. ©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DI-604.05082002...
  • Page 2: Restart Your Computer

    First, connect the power adapter to the receptor at the side panel of the DI-704P and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation.
  • Page 3: Broadband Router

    DI-704P Broadband Router Using additional Ethernet (CAT5 UTP/Straight-Through) cables, connect your Ethernet-equipped computer(s) to one of the 3 remaining Ethernet LAN ports on the back panel of the DI-704P. LAN Port LEDs. Each of the LAN ports on the back of the...
  • Page 4: Using The Setup Wizard

    Using The Setup Wizard DI-704P Open your Web browser and type “http://192.168.0.1” into the URL address box. Then press the Enter or Return key. The logon pop-up screen will appear. Type “admin” for the username and leave the password field blank.
  • Page 5 You will see the following screens. Click Next Set password. You have the option to establish a new admin password for the DI-704P Click Next...
  • Page 6 The Setup Wizard (continued) Select the type of Internet connection for your router. Select one of these settings If you are unsure of which setting to select, please contact your Internet Service Provider. Click Next If you selected Dynamic Address, this screen will appear: Click the “Clone MAC...
  • Page 7 If your ISP requires a Static IP Address, and this option is selected, then this screen will appear: Do not use the numbers Enter the IP address displayed in these information originally fields. They are only provided to you by your ISP. shown as an example.
  • Page 8: Test Your Internet Connection

    Web site to test your Internet connection. For additional settings or information, refer to the Advanced, Tools, or Status tabs on the web- management interface; or to the manual located on the CD-ROM. For optional Printer setup please refer to the DI-704P’s Manual.
  • Page 9 Here’s how to configure the network adapter to obtain an IP address automatically for the DI-704P Broadband Router. Microsoft Windows XP: Go to Start > right click on My Network Places >...
  • Page 10 Apple Macintosh OS X: Go to the Apple Menu and Select System Click on Preferences. Network Select Built-in Ethernet in the Show pull-down menu Select Using DHCP in the Configure pull- down menu Click on Apply Now The IP address information, the Subnet Mask, the Router’s IP address and the Ethernet adapter address will appear.
  • Page 11: Technical Support

    Technical Support You can find the most recent software and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States for the duration of the warranty period on this product. U.S. customers can contact D-Link technical support through our web site or by phone.

Table of Contents