D-Link DI-304 User Manual page 32

DI-304ISDN Remote Router
9. Firewall Setup
System Management:
1. Syslog Setup
2. Time Setup:
3. Configuration Back/Restore
4. Management Setup
5. Reboot System
6. Firmware Upgrade (TFTP Server)
Status:
1. Online Status
2. Diagnostic Tools.
Help:
Help file can be accessed here.
The LAN-to-LAN Dialer Profiles are different from last setup menu. Here up to
16 LAN to LAN profiles can be set for access to up to 16 remote networks via
an ISDN line. These profiles have dial-out/dial-in/static route functions.
The router has a powerful built-in firewall. Up to 84 Call Filter and Data Filter
rules may be set.
The router can be setup as a syslog client.
Sets time information for the router.
Router configuration can be saved in a single file for restoration later.
This allows you to grant or limit access rights to manage the router. Also, you may
set HTTP or Telnet ports to specific port numbers of your choice.
You can restart the router with the default configuration or with the current running
configuration.
Enables the TFTP server for firmware upgrades.
Click this item to view the current online status and statistics of the system.
Diagnostic tools offers useful tools to diagnose the router or your network, e.g.
view ARP table, routing table, NAT port map, DHCP server status, last triggered
packet, etc.
Note: You should now have some basic concepts on how to setup and configure
the router. The following chapters will explain each setup menu and related settings
in more detail.
24