D-Link DI-304 User Manual page 70

DI-304/DI-304M ISDN Remote Router
♦
Comments – Enter filter set comment/description. Its maximum length is 14
characters.
♦
Check to enable the Filter Rule – Enable the filter rule.
♦
Pass or Block – Specify the action to be taken when packets match the rule.
? Block Immediately - Packets matching the rule will be dropped
immediately.
? Pass Immediately - Packets matching the rule will be passed
immediately.
? Block If No Further Match - A packet matching the rule and that does
not match further rules, will be dropped.
? Pass If No Further Match - A packet matching the rule,
and that does not match further rules, will pass through.
♦
Branch to Other Filter Set – If the packet matches the filter rule, the next
filter rule will branch to the specified filter set.
♦
Duplicate to LAN – If you want to log the matched packets to another
network device, check this box to enable it. The MAC Address is defined in
General Setup → MAC Address for Packet Duplication.
♦
Log – Check this box to enable the log function. Use the Telnet command "log
-f" to view the logs.
♦
Direction – Set the direction of packet flow. For the Call Filter, this setting is
irrelevant.
IN: Specify the rule for filtering incoming packets.
OUT: Specify the rule for filtering outgoing packets.
62