The Configuration for a WLAN connection
Setting the Parameters
for a Radio Network
Searching for and
Selecting the Network
Entering the Password (for
encoded networks)
Storing Network Settings
and Restarting
• Connect the WLAN aerial (supplied) to the MP 1250 R's WLAN aerial socket,
and ensure that no cable is attached to the MP 1250 R's LAN socket.
• Switch the MP 1250 R on, and select the Streaming Client function by
pressing the
button on the front panel.
• Now call up the Configuration menu as described above: with a long press on
the
button on the front panel. You should now see the menu
reproduced below, dis-playing the network parameters.
First select the menu point 'WLAN configuration', and activate it by pressing
the
button.
A menu appears showing these points:
• Rescan
- initiates new search for accessible radio networks
• Set manually - adding a WLAN manually
After a brief delay the networks present in the vicinity are listed on the screen.
You can use the 'Rescan' function to start a new search for networks present in
the vicinity.
Please select one of the networks located, and activate it by pressing the
button.
If your network is encoded, the window illustrated above now appears. Please
enter the network password and confirm the entry by pressing
select the point 'Save' and confirm with
Please enter the settings for the remaining network parameters as described
earlier in the section entitled 'Setting the Parameters for a Wired Network'.
Finally select the menu point 'Save', and press the
accepts the settings, and restarts the MP 1250 R with the new settings.
.
button; this action
. Now
27