T+A MP 1250 R User Manual page 28

Special case:
Manual Network Entry
28
The MP 1250 R automatically searches for accessible radio networks, and lists
them when you call up the menu point 'WLAN Configuration'. However, the
MP 1250 R can only locate networks which broadcast their SSID network identity.
For security reasons many radio networks do not transmit the SSID (if you are not
sure about this, ask your network administrator). In such cases the network
cannot be found and displayed automatically, i.e. it must be set up manually. This
is the purpose of the menu point 'Set Manually'. If you select this menu point, you
will see the input window reproduced below; you can enter the parameters for
your network at this point.
After successfully entering all the data, please select the point 'Save', and confirm
 button. Your MP 1250 R now accepts the data you have
by pressing the 
 
entered relating to the WLAN network, and moves on to the subordinate menu in
which you can set the remaining network parameters, as described earlier in the
section entitled 'Setting the Parameters for a Wired Network'.
You can now leave the Configuration menu by selecting the menu point 'Save'.