Table of Contents
Advertisement
There are a few basic functions of the MP 1250 R which are always available regardless of the selected source
(Streaming Client, ...). For example, these include the System Configuration menu, in which device settings such as
screen brightness and language can be carried out.
In the System Configuration menu general device settings are adjusted. This menu is described in detail in the following
chapter.
Calling up and operating
the menu
Menu item
Display Brightness
(Screen brightness)
Menu item
Language
Menu item
Device Adr
With this menu the network settings are adjusted. This is necessary only when installing and setting up the MP 1250 R
or if your home network shall be reconfigured.
The operation of this menu is described in detail in the chapter Installation / Using the system for the first time,
Network Configuration.
Entering the network
settings menu
10
Basic Functions of the MP 1250 R
System Settings (System Configuration menu)
• The menu is called up by briefly pressing the
panel
• When the menu is opened, the following select points appear on the screen:
• Display Brightness (Screen brightness)
• Language
• Device Adr
• Use the
/
• To change a selected menu point, first press the
it using the / buttons.
• To accept the setting, press the
• You can press the
conclude without accepting a change.
• Press the
button again to leave the menu.
At this point you can adjust the brightness of the integral screen to suit your
personal preference. Available settings are:
• Off
• Medium
• High
This menu item lets you select the display language for the MP 1250 R.
The language of data received from external sources (eg. iPod, UPnP-AV-
server) depends on the settings of the external device and can not be selected
in MP 1250 R's language menu.
Here you can assign the source button which selects and activates the
MP 1250 R as listening source.
The MP 1250 R must be connected to the corresponding audio inputs of your
amplifier or receiver.
Network Settings
• To enter this menu keep the
the menu opens on the display.
to select a menu point.
button after completing the change.
button at any time to interrupt the procedure, i.e. to
-
button on the front panel pressed until
button on the front
button, then change
Advertisement
Table of Contents
