Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ACTi SED-2400
Summary of Contents for ACTi SED-2400
-
Page 1: Quick Installation Guide
Video Server SED-2400 Quick Installation Guide... -
Page 2: Getting Started
Getting Started PACKAGE CONTENTS SED-2400 Warranty Card Software CD Terminal Blocks & Screws Power Adaptor... -
Page 3: Physical Description
1.2 PHYSICAL DESCRIPTION Channel Number Video Input / Output The video server supports one analog video input and output of composite signal with BNC connectors Audio Input / Output The video server supports one audio input and output with earphone jack Action LED Indicator The LED will light up after video server has successfully completed the boot process. - Page 4 Step 3: Keep holding the reset button depressed around 6 seconds, release the reset button. The unit will start up with factory default settings. Terminal Blocks Pin 1~6 The video server supports two alarm input and two alarm output. DI: Logic Level 0: 0~0.4V; Logic Level 1: 3.3~30V DO: Logic Level 0: 0.1~0.6V;...
- Page 5 connector. Supporting NWAY, this Video server can auto detect the speed of local network segment (10Base-T/100Base-TX Ethernet). 10. WAN Port The Video server connects to the WAN (wide area network) via a standard RJ45 connector. Supporting NWAY, this Video server can auto detect the speed of local network segment (10Base-T/100Base-TX Ethernet).
- Page 6 1.3 CONNECT NECESSARY CABLES The Ethernet cable and power cable are necessary for previewing function.Make sure all cables are correctly and firmly connected. 1. Connect an analog monitor to video server video out (BNC connector). 2. Connect the power adaptor to video server 3.
-
Page 7: Quick Tour
Quick Tour This section guides you with a quick tour on video server. 2.1 Configure the Video Server 2.1.1 Make sure network environment Default IP of video server is 192.168.0.100. Please make sure video server and your PC are on the same network segment before running the installation. Please set the settings as below. - Page 8 2.1.2 Open Internet Explorer with IP address NOTE: If your web browser is earlier than IE6, then download IE6 is recommended. NOTE: The video server default IP address is set to 192.168.0.100 2.1.3 Login with default administrator’s account & password NOTE: Default administrator account is set to Admin, password is set to 123456, and click...
- Page 9 2.1.4 Preview the video NOTE: In your Client PC, please make sure the setting of Network Connections Type is set to Auto Negotation, since video server follows MII standard. Otherwise, you might not see the live video.
- Page 10 2.1.5 Set the new IP address *Host Name : Enter in the domain name, Default Host Name is ACTi. *Language : Language setting for Web Configurator after Save Reboot. Default setting is English. *IP Address : The IP address of the LAN interface. The default IP address is 192.168.0.100.
- Page 11 2.1.6 Check Default Video Setting The streaming type [Version 1.0] – without audio function The streaming type [Version 2.0] – with audio function NOTE: Please make sure the TV Input (NTSC / PAL) is meet your requirement, and click button. 2.1.7 Click Save Reboot to restore all settings and please wait about 30 seconds for system reboot.
Need help?
Do you have a question about the SED-2400 and is the answer not in the manual?
Questions and answers