Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ACTi SED-2600
Summary of Contents for ACTi SED-2600
- Page 1 Video Server SED-2600 User’s Manual Ver.060905...
-
Page 2: Copyright
Copyright This manual is the intellectual property of ACTi and is protected by copyright. All rights are reserved. No part of this document maybe reproduced or transmitted for any purpose by any means including electronic or mechanical without the official written permission from ACTi. -
Page 3: Fcc/Ce Regulation
typographical or technical errors and reserve the right to make changes to the product and manuals without prior notice. FCC/CE Regulation NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. -
Page 4: Table Of Contents
Table of Contents PRECAUTIONS________________________________________________ 0-1 Copyright __________________________________________________________________ 0-1 Trademarks ________________________________________________________________ 0-1 Liability ___________________________________________________________________ 0-1 FCC/CE Regulation __________________________________________________________ 0-2 INTRODUCTION ______________________________________________ 1-4 Package Contents _______________________________________________ 1-4 Features and Benefits ____________________________________________ 1-5 Safety Instructions ______________________________________________ 1-7 Physical Description _____________________________________________ 1-9... -
Page 5: Introduction
INTRODUCTION 1.1 Package Contents SED-2600 Warranty Card Product CD Terminal Blocks Power Cord Bracket... -
Page 6: Features And Benefits
1.2 Features and Benefits The Video server is a cutting-edge digital video transmission device. It can compress and transmit two channels of real time images with outstanding images quality (D1, 720x480) at reasonable bandwidth through a standard TCP/IP network. This video server also provide two-way audio streams along with each video channel. - Page 7 modem. DDNS Supported The Video server supports DDNS (Dynamic Domain Name Server), users can set the Video server at a virtual domain name (such as cam1.Taipei.xxx) at dynamic IP. Everyone can use the virtual domain name to view the video anywhere that has the access to the internet. Build-in Hardware Motion Detection No more external motion sensors are required.
-
Page 8: Safety Instructions
1.3 Safety Instructions Don’t use the power supply with other voltages This device is likely to be damaged or damage other equipments / personnel, if you use a power supply with different voltage than the one included with this device. All warranty of this product will be voided in the situations above. - Page 9 operating Instructions in this manual. Adjust only those controls that are covered by the instruction manual as an improper adjustment . Other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation.
-
Page 10: Physical Description
1.4 Physical Description Channel Number Video Input / Output Each channel supports one analog video input and output of composite signal with BNC connectors Action LED Indicator The LED will light up after video server has successfully completed the boot process. Serial Port LED Indicator LEDs indicating when serial port is active. - Page 11 Power Switch Video Server power switch. Terminal Blocks Pin 1~6 The video server supports two alarm input and two alarm output. DI: Logic Level 0: 0~0.4V; Logic Level 1: 3.3~30V DO: Logic Level 0: 0.1~0.6V; Logic Level1: 2.4~5V NAME DESCRIPTION Digital Output 1 Digital Output 2 Ground Pin...
- Page 12 Ethernet). The Ethernet port is for FTTH and can connect to a xDSL or cable modem 11. Terminal Blocks Pin 7~12 Pin 7~10: RS232/422/485. Default mode is RS-485 Pin 12: GND Tx+ Tx- Rx+ Rx- DESCRIPTION NAME RS-485 RS-422 RS-232 Ground Pin 1-11...
Need help?
Do you have a question about the SED-2600 and is the answer not in the manual?
Questions and answers