Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ACTi SED-2300Q
Summary of Contents for ACTi SED-2300Q
-
Page 1: Quick Installation Guide
Quad Video Server SED-2300Q Ver. 070821 Quick Installation Guide... -
Page 2: Getting Started
Getting Started PACKAGE CONTENTS SED-2300Q Warranty Card Product CD Terminal Blocks & Screws Power Adaptor (Option) -
Page 3: Physical Description
1.2 PHYSICAL DESCRIPTION Read the following information to familiarize yourself with the video server, and make particular notes of where the connectors and LEDs are located. Front Panel Red LED LED indicating Power or H/W Reset Function Yellow LED LED indicating when RS-485 is active Green LED LED indicating when LAN/WAN is active Reset Button... -
Page 4: Rear Panel
Terminal Blocks Pin 7~12 DESCRIPTION NAME RS-485 RS-232 Non Connector Non Connector Power Input (DC +12V) Ground Pin of Power Input WAN port The video server connects to the WAN (wide area network) via a standard RJ45 connector. Supporting NWAY, this video server can auto detect the speed of local network segment (10Base-T/100Base-TX Ethernet). - Page 5 Analog Video Ouput of Composite Signal with BNC Connector 1.3 CONNECT NECESSARY CABLES The BNC cable for video input, Ethernet cable and power cable are necessary for previewing function. Make sure all cables are correctly and firmly connected. Connect an analog video source (eg. CCD Camera) to the video server’s CAM1 ~ CAM4 (BNC connector).
-
Page 6: Quick Tour
Quick Tour This section guides you with a quick tour on this Quad video server 2.1 Configure the Quad Video Server 2.1.1 Make sure network environment Default IP of video server is 192.168.0.100. Please make sure the video server and your PC on the same network segment before running the installation. - Page 7 2.1.2 Open Internet Explorer with IP address This section describes how to configure the video server. The product administrator has unlimited access to all setup windows and normal users can only watch the live images. The video server is configured under a standard browser (Microsoft Internet Explorer 6.0 or above). Follow the procedures below to configure the video server.
- Page 8 Once successfully login, the “Main Setup page” will be displayed as below. 2.1.3 Preview the video...
- Page 9 Click the [Apply] button to confirm the setting. 2.1.4 Set a new IP address *Host Name : Enter a domain name. The default Host Name is ACTi. Language setting for Web Configurator after [Save Reboot]. Default setting is *Language : English.
- Page 10 IMPORTANT: After the IP address is changed, please record this IP address. There is no way to connect to the video server if user forgets the new IP address. 2.1.5 Check Default Video Setting NOTE: Please make sure the TV Input (NTSC / PAL) is meet your requirement, and click button.
Need help?
Do you have a question about the SED-2300Q and is the answer not in the manual?
Questions and answers