Download
Share
Print this page
  1. Manuals
  2. Brands
  3. IEI Technology Manuals
  4. Motherboard
  5. ICE-ULT3
  6. User manual

IEI Technology ICE-ULT3 User Manual

Com express r2.1 module (type 6), 6th gen. intel core i7/i3 or celeron processor, dual ddr4 slot, sata 6gb/s and rohs compliant
Hide thumbs

Advertisement

Quick Links

Download this manual
ICE-ULT3 COM Express Module
MODEL:
ICE-ULT3
COM Express R2.1 Module (Type 6),
th
6
Gen. Intel® Core™ i7/i3 or Celeron® Processor,
Dual DDR4 Slot, SATA 6Gb/s and RoHS Compliant
User Manual
Page i
Rev. 1.02 – June 3, 2021

Advertisement

loading
Need help?

Need help?

Do you have a question about the ICE-ULT3 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for IEI Technology ICE-ULT3

Summary of Contents for IEI Technology ICE-ULT3

  • Page 1 ICE-ULT3 COM Express Module MODEL: ICE-ULT3 COM Express R2.1 Module (Type 6), Gen. Intel® Core™ i7/i3 or Celeron® Processor, Dual DDR4 Slot, SATA 6Gb/s and RoHS Compliant User Manual Page i Rev. 1.02 – June 3, 2021...
  • Page 2 ICE-ULT3 COM Express Module Revision Date Version Changes June 3, 2021 1.02 Updated Chapter 6 Modified Appendix D September 6, 2018 1.01 Updated Figure 3-3: COM Express A-B Connector Location (pin B84~B87) November 2, 2016 1.00 Initial release Page ii...
  • Page 3 ICE-ULT3 COM Express Module Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

  • Page 4: Manual Conventions

    ICE-ULT3 COM Express Module Manual Conventions WARNING Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. CAUTION Cautionary messages should be heeded to help reduce the chance of losing data or damaging the product.

  • Page 5: Table Of Contents

    PTIONAL TEMS 3 CONNECTORS ......................13 3.1 P ..............14 ERIPHERAL NTERFACE ONNECTORS 3.1.1 ICE-ULT3 Layout .................... 14 3.1.2 Peripheral Interface Connectors ..............15 3.2 I ..............15 NTERNAL ERIPHERAL ONNECTORS 3.2.1 COM Express A-B Connector ................15 3.2.2 COM Express C-D Connector ................. 20 3.2.3 SO-DIMM Connectors ..................
  • Page 6 ICE-ULT3 COM Express Module 4.3 SO-DIMM I ..................29 NSTALLATION 4.4 M ICE-ULT3 ..............30 OUNTING ASEBOARD 5 BIOS ..........................33 5.1 I ......................34 NTRODUCTION 5.1.1 Starting Setup ....................34 5.1.2 Using Setup ...................... 34 5.1.3 Getting Help ..................... 35 5.1.4 Unable to Reboot after Configuration Changes ..........
  • Page 7 ICE-ULT3 COM Express Module 5.4.1.1.1 LCD Control ..................62 5.4.1.2 Memory Configuration ................64 5.4.2 PCH-IO Configuration ..................65 5.4.2.1 PCI Express Configuration ............... 66 5.4.2.2 HD Audio Configuration ................67 5.5 S ......................... 68 ECURITY 5.6 B ........................69 5.7 E...
  • Page 8 List of Figures Figure 1-1: ICE-ULT3 ........................2 Figure 1-2: On-board Components and Connectors ..............4 Figure 1-3: ICE-ULT3 Dimensions (with heatsink) (mm) ............5 Figure 1-4: ICE-ULT3 Dimensions (without heatsink) (mm) ............5 Figure 1-5: Data Flow Diagram ...................... 6 Figure 3-1: Connectors (Front Side) ...................

  • Page 9: List Of Tables

    ICE-ULT3 COM Express Module List of Tables Table 1-1: Model Variations ......................3 Table 1-2: ICE-ULT3 Specifications ....................8 Table 2-1: Packing List ......................... 11 Table 2-2: Optional Items ......................12 Table 3-1: Peripheral Interface Connectors ................15 Table 3-2: COM Express A-B Connector Pin Definitions ............19 Table 3-3: COM Express C-D Connector Pin Definitions ............
  • Page 10 ICE-ULT3 COM Express Module BIOS Menus BIOS Menu 1: Main ........................37 BIOS Menu 2: Advanced ......................39 BIOS Menu 3: ACPI Settings ....................... 39 BIOS Menu 4: AMT Configuration ....................40 BIOS Menu 5: iWDD H/W Monitor ....................41 BIOS Menu 6: Smart Fan Mode Configuration ................
  • Page 11 ICE-ULT3 COM Express Module BIOS Menu 27: Exit ........................71 ICE-ULT3 Page xi...

  • Page 13: Introduction

    ICE-ULT3 COM Express Module Chapter Introduction Page 1...

  • Page 14: Introduction

    COM Express baseboard to be designed, while leaving the choice of processor till the later stages of design. The ICE-ULT3 provides a low power option with the full range of modern I/O options. The ICE-ULT3 embedded module is designed for flexible integration by system developers into customized platform devices.

  • Page 15: Model Variations

    ICE-ULT3 COM Express Module 1.2 Model Variations The model variations for the ICE-ULT3 series are listed in Table 1-1. On-board SoC Model Name Clock Speed # of Cores L2 Cache Max TDP ICE-ULT3-i7 Intel® Core ™ i7-6600U 3.4 GHz 4 MB...

  • Page 16: Board Overview

    ICE-ULT3 COM Express Module 1.4 Board Overview The on-board components and connectors of the ICE-ULT3 are shown in the figures below. Figure 1-2: On-board Components and Connectors Page 4...

  • Page 17: Dimensions

    ICE-ULT3 COM Express Module 1.5 Dimensions The main dimensions of the ICE-ULT3 are shown in the diagrams below. Figure 1-3: ICE-ULT3 Dimensions (with heatsink) (mm) Figure 1-4: ICE-ULT3 Dimensions (without heatsink) (mm) Page 5...

  • Page 18: Data Flow

    ICE-ULT3 COM Express Module 1.6 Data Flow Figure 1-5 shows the data flow between the system chipset, the CPU and other components installed on the motherboard. Figure 1-5: Data Flow Diagram Page 6...

  • Page 19: Technical Specifications

    ICE-ULT3 COM Express Module 1.7 Technical Specifications The ICE-ULT3 technical specifications are listed below. ICE-ULT3 Form Factor PICMG COM Express R2.1 Type 6 6th generation Intel® mobile ULT on-board SoC:  Intel® Core™ i7-6600U (up to 3.4GHz, dual-core, 4MB cache, TDP=15W) On-board SoC ...

  • Page 20: Table 1-2: Ice-Ult3 Specifications

    ICE-ULT3 COM Express Module ICE-ULT3 Expansions 1 x PCIe x1 signal to base board (via PCIe x16 channel) (Signal to Baseboard) 8 x PCIe x1 signal to base board 4 x USB 2.0 4 x USB 3.2 Gen 1 (with four USB 2.0)

  • Page 21: Packing List

    ICE-ULT3 COM Express Module Chapter Packing List Page 9...

  • Page 22: Anti-Static Precautions

    Only handle the edges of the PCB: Don't touch the surface of the motherboard. Hold the motherboard by the edges when handling. 2.2 Unpacking Precautions When the ICE-ULT3 is unpacked, please do the following:  Follow the antistatic guidelines above.

  • Page 23: Packing List

    If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the ICE-ULT3 was purchased from or contact an IEI sales representative directly by sending an email to sales@ieiworld.com.

  • Page 24: Optional Items

    ICE-ULT3 COM Express Module 2.4 Optional Items The following are optional components which may be separately purchased: Item and Part Number Image Baseboard for COM Express Type 6 modules (P/N: ICE-DB-T6R-R11) Table 2-2: Optional Items Page 12...

  • Page 25: Connectors

    ICE-ULT3 COM Express Module Chapter Connectors Page 13...

  • Page 26: Peripheral Interface Connectors

    ICE-ULT3 COM Express Module 3.1 Peripheral Interface Connectors This chapter details all the connectors. 3.1.1 ICE-ULT3 Layout The figures below show all the connectors on the front side and the solder side. Figure 3-1: Connectors (Front Side) Figure 3-2: Connectors (Solder Side)

  • Page 27: Peripheral Interface Connectors

    ICE-ULT3 COM Express Module 3.1.2 Peripheral Interface Connectors The table below lists all the connectors on the ICE-ULT3. Connector Type Label COM Express A-B connector COM Express connector COM Express C-D connector COM Express connector DDR4 SO-DIMM slot 260-pin SO-DIMM slot...
  • Page 28 ICE-ULT3 COM Express Module Pin No. Description Pin No. Description GND15 GBE0_MDI3- GBE0_ACT# GBE0_MDI3+ LPC_FRAME# GBE0_LINK100# LPC_AD0 GBE0_LINK1000# LPC_AD1 GBE0_MDI2- LPC_AD2 GBE0_MDI2+ LPC_AD3 RSVD RSVD GBE0_MDI1- RSVD GBE0_MDI1+ LPC_CLK GND1 GND16 GBE0_MDI0- PWRBTN# GBE0_MDI0+ SMB_CK GBE0_CTREF SMB_DAT SUS_S3# SMB_ALERT# SATA0_TX+...
  • Page 29 ICE-ULT3 COM Express Module Pin No. Description Pin No. Description AC/HD_SYNC AC/HD_SDIN1 AC/HD_RST# AC/HD_SDIN0 GND3 GND18 AC/HD_BITCLK SPKR AC/HD_SDOUT I2C_CLK BIOS_DISABLE# I2C_DAT THRMTRIP# RSVD USB6- USB7- USB6+ USB7+ USB_6_7_OC# USB_4_5_OC# USB4- USB5- USB4+ USB5+ GND4 GND19 USB2- USB3- USB2+ USB3+...
  • Page 30 ICE-ULT3 COM Express Module Pin No. Description Pin No. Description GND6 GPO2 PCIE_TX3+ PCIE_RX3+ PCIE_TX3- PCIE_RX3- GND7 GND21 PCIE_TX2+ PCIE_RX2+ PCIE_TX2- PCIE_RX2- GPI1 GPO3 PCIE_TX1+ PCIE_RX1+ PCIE_TX1- PCIE_RX1- GND8 WAKE0# GPI2 RSVD PCIE_TX0+ PCIE_RX0+ PCIE_TX0- PCIE_RX0- GND9 GND22 LVDS_A0+ LVDS_B0+...

  • Page 31: Table 3-2: Com Express A-B Connector Pin Definitions

    ICE-ULT3 COM Express Module Pin No. Description Pin No. Description GPI3 VCC5SBY2 RSVD VCC5SBY3 RSVD VCC5SBY4 PCIE0_CK_REF+ BIOS_DIS1# PCIE0_CK_REF- VGA_RED GND11 GND24 SPI_VCC VGA_GRN SPI_MISO VGA_BLU GPO0 VGA_HSYNC SPI_CLK VGA_VSYNC SPI_MOSI VGA_I2C_CK RSVD VGA_I2C_DAT RSVD (TYPE 10#) SPI_CS# RS1_TX RSVD...

  • Page 32: Com Express C-D Connector

    ICE-ULT3 COM Express Module 3.2.2 COM Express C-D Connector CN Label: CN Type: 220-pin COM Express connector CN Location: See Figure 3-4 CN Pinouts: See Table 3-3 The standard COM Express C-D connector location and pinouts are shown below. Figure 3-4: COM Express C-D Connector Location Pin No.
  • Page 33 ICE-ULT3 COM Express Module Pin No. Description Pin No. Description GND1 GND16 USB_SSRX3- USB_SSTX3- USB_SSRX3+ USB_SSTX3+ RSVD DDI1_CTRLCLK_AUX+ RSVD DDI1_CTRLDATA_AUX- RSVD RSVD RSVD RSVD PCIE_RX6+ PCIE_TX6+ PCIE_RX6- PCIE_TX6- GND2 GND17 PCIE_RX7+ PCIE_TX7+ PCIE_RX7- PCIE_TX7- DDI1_HPD RSVD RSVD RSVD RSVD DDI1_PAIR0+...
  • Page 34 ICE-ULT3 COM Express Module Pin No. Description Pin No. Description RSVD DDI2_PAIR0+ RSVD DDI2_PAIR0- GND4 GND19 RSVD DDI2_PAIR1+ RSVD DDI2_PAIR1- RSVD DDI2_HPD RSVD RSVD RSVD DDI2_PAIR2+ RSVD DDI2_PAIR2- RSVD RSVD RSVD DDI2_PAIR3+ RSVD DDI2_PAIR3- GND5 GND20 PEG_RX0+ PEG_TX0+ PEG_RX0- PEG_TX0-...
  • Page 35 ICE-ULT3 COM Express Module Pin No. Description Pin No. Description RSVD3 GND28 RSVD RSVD RSVD RSVD GND9 GND22 RSVD RSVD RSVD RSVD RSVD RSVD RSVD RSVD RSVD RSVD GND8 GND29 RSVD4 RSVD RSVD RSVD RSVD RSVD GND10 GND23 RSVD RSVD...

  • Page 36: So-Dimm Connectors

    ICE-ULT3 COM Express Module Pin No. Description Pin No. Description RSVD RSVD GND12 GND33 RSVD6 RSVD RSVD RSVD RSVD RSVD GND13 GND25 C100 D100 RSVD RSVD C101 D101 RSVD RSVD C102 D102 GND34 C103 D103 VCC_12V1 VCC_12V7 C104 D104 VCC_12V2...

  • Page 37: Figure 3-5: So-Dimm Connector Locations

    ICE-ULT3 COM Express Module NOTE: If there is only one memory module being installed, install it in the DIMM1 slot. For dual channel configuration, always install two identical memory modules that feature the same capacity, timings, voltage, number of ranks and the same brand.

  • Page 38: Installation

    ICE-ULT3 COM Express Module Chapter Installation Page 26...

  • Page 39: Anti-Static Precautions

    Electrostatic discharge (ESD) can cause serious damage to electronic components, including the ICE-ULT3. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the ICE-ULT3 or any other electrical component is handled, the following anti-static precautions are strictly adhered to.

  • Page 40: Installation Considerations

    This helps to prevent potential ESD damage.  Turn all power to the ICE-ULT3 off: When working with the ICE-ULT3, make sure that it is disconnected from all power supplies and that no electricity is being fed into the system. Page 28...

  • Page 41: So-Dimm Installation

    ICE-ULT3 COM Express Module Before and during the installation of the ICE-ULT3 DO NOT:  Remove any of the stickers on the PCB board. These stickers are required for warranty validation.  Use the product before verifying all the cables and power connectors are properly connected.

  • Page 42: Mounting Ice-Ult3 To Baseboard

    ICE-ULT3 COM Express Module Figure 4-1: SO-DIMM Installation Step 1: Locate the SO-DIMM socket. Place the ICE-ULT3 on an anti-static mat with the front side facing up. Step 2: Align the SO-DIMM with the socket. Align the notch on the memory with the notch on the memory socket.

  • Page 43: Figure 4-2: Connect The Com Express Connectors

    Follow the steps below to install the ICE-ULT3 to the optional baseboard. Step 1: Align the two COM Express connector on the solder side of the ICE-ULT3 with the corresponding connector on the baseboard. Gently push the COM Express module down to ensure the connectors are properly connected (Figure 4-2).

  • Page 44: Figure 4-3: Secure The Heatsink

    ICE-ULT3 COM Express Module Figure 4-3: Secure the Heatsink Page 32...

  • Page 45: Bios

    ICE-ULT3 COM Express Module Chapter BIOS Page 33...

  • Page 46: Introduction

    ICE-ULT3 COM Express Module 5.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed. NOTE: Some of the BIOS options may vary throughout the life cycle of the product and are subject to change without prior notice.

  • Page 47: Getting Help

    ICE-ULT3 COM Express Module Function Right arrow Move to the item on the right hand side Increase the numeric value or make changes Decrease the numeric value or make changes F1 key General help, only for Status Page Setup Menu and Option...
  • Page 48 ICE-ULT3 COM Express Module  Security – Sets User and Supervisor Passwords.  Boot – Changes the system boot configuration.  Save & Exit – Selects exit options and loads default settings The following sections completely describe the configuration options found in the menu items at the top of the BIOS screen and listed above.

  • Page 49: Main

    ICE-ULT3 COM Express Module 5.2 Main The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit BIOS Information...

  • Page 50: Advanced

    ICE-ULT3 COM Express Module The System Overview field also has two user configurable fields:  System Date [xx/xx/xx] Use the System Date option to set the system date. Manually enter the day, month and year.  System Time [xx:xx:xx] Use the System Time option to set the system time. Manually enter the hours, minutes and seconds.

  • Page 51: Acpi Settings

    ICE-ULT3 COM Express Module Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit > ACPI Settings System ACPI Parameters. > AMT Configuration > iWDD H/W Monitor > iWDD Super IO Configuration >...

  • Page 52: Amt Configuration

    ICE-ULT3 COM Express Module  ACPI Sleep State [S3 (Suspend to RAM)] Use the ACPI Sleep State option to specify the sleep state the system enters when it is not being used.  S3 (Suspend to The caches are flushed and the CPU is powered EFAULT off.

  • Page 53: Iwdd H/W Monitor

    ICE-ULT3 COM Express Module  Intel AMT [Enabled] Use Intel AMT option to enable or disable the Intel® AMT function.  Disabled Intel® AMT is disabled  Enabled Intel® AMT is enabled EFAULT  Un-configure ME [Disabled] Use the Un-configure ME option to perform ME unconfigure without password operation.

  • Page 54: Smart Fan Mode Configuration

    ICE-ULT3 COM Express Module  PC Health Status The following system parameters and values are shown. The system parameters that are monitored are:  CPU Temperature  CPU Fan Speed  Voltages CPU_CORE +12V +DDR +5VSB +3.3VSB 5.3.3.1 Smart Fan Mode Configuration Use the Smart Fan Mode Configuration submenu (BIOS Menu 6) to configure fan temperature and speed settings.

  • Page 55: Auto Mode Fan Start Temperature [50]

    ICE-ULT3 COM Express Module Use the CPU_FAN1 Smart Fan Control BIOS option to configure the CPU Smart Fan.  Manual Mode The fan spins at the speed set in the Manual Mode option  Auto Mode The fan adjusts its speed using these...

  • Page 56: Auto Mode Fan Start Pwm [30]

    ICE-ULT3 COM Express Module the CPU is at a very high temperature and therefore cause the system to be damaged. The Auto mode fan off temperature option can only be set if the SYS_FAN1 Smart Fan control option is set to Auto Mode. If the system temperature is lower than Auto mode fan off temperature, the fan speed change to be lowest.

  • Page 57: Iwdd Super Io Configuration

    ICE-ULT3 COM Express Module 5.3.4 iWDD Super IO Configuration Use the iWDD Super IO Configuration menu (BIOS Menu 7) to set or change the configurations for the serial ports. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced...

  • Page 58: Serial Port 1 Configuration

    ICE-ULT3 COM Express Module 5.3.4.1.1 Serial Port 1 Configuration  Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port.  Disable the serial port Disabled  Enabled Enable the serial port EFAULT  Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt address.

  • Page 59: Serial Port 2 Configuration

    ICE-ULT3 COM Express Module 5.3.4.1.2 Serial Port 2 Configuration  Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port.  Disabled Disable the serial port  Enabled Enable the serial port EFAULT  Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt address.

  • Page 60: Rtc Wake Settings

    ICE-ULT3 COM Express Module 5.3.5 RTC Wake Settings The RTC Wake Settings menu (BIOS Menu 9) configures RTC wake event. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced Wake system with Fixed Time [Disabled] Enable or disable System wake on alarm event.

  • Page 61: Serial Port Console Redirection

    ICE-ULT3 COM Express Module Wake up hour Wake up minute Wake up second After setting the alarm, the computer turns itself on from a suspend state when the alarm goes off. 5.3.6 Serial Port Console Redirection The Serial Port Console Redirection menu (BIOS Menu 10) allows the console redirection options to be configured.

  • Page 62: Legacy Console Redirection Settings

    ICE-ULT3 COM Express Module  Console Redirection [Disabled] Use Console Redirection option to enable or disable the console redirection function.  Disabled Disabled the console redirection function EFAULT  Enabled Enabled the console redirection function 5.3.6.1 Legacy Console Redirection Settings The Legacy Console Redirection Settings menu (BIOS Menu 11) allows the legacy console redirection options to be configured.

  • Page 63: Console Redirection Settings

    ICE-ULT3 COM Express Module 5.3.6.2 Console Redirection Settings The Console Redirection Settings menu (BIOS Menu 12) allows the console redirection options to be configured. The option is active when Console Redirection option is enabled. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc.

  • Page 64: Bits Per Second [115200]

    ICE-ULT3 COM Express Module  Bits per second [115200] Use the Bits per second option to specify the serial port transmission speed. The speed must match the other side. Long or noisy lines may require lower speeds.  9600 Sets the serial port transmission speed at 9600.

  • Page 65: Cpu Configuration

    ICE-ULT3 COM Express Module  Stop Bits [1] Use the Stop Bits option to specify the number of stop bits used to indicate the end of a serial data packet. Communication with slow devices may require more than 1 stop bit.

  • Page 66: Hyper Threading Function [Enabled]

    ICE-ULT3 COM Express Module  Hyper Threading Function [Enabled] Use the Hyper Threading function to enable or disable the CPU hyper threading function.  Disabled Disables the use of hyper threading technology  Enabled Enables the use of hyper threading technology EFAULT ...

  • Page 67: Sata Configuration

    ICE-ULT3 COM Express Module  CPU C State [Disabled] Use the CPU C State option to enable or disable CPU C state.  Disabled Disables CPU C state. EFAULT  Enabled Enables CPU C state. 5.3.8 SATA Configuration Use the SATA Configuration menu (BIOS Menu 14) to change and/or set the configuration of the SATA devices installed in the system.

  • Page 68: Sata Mode Selection [Ahci]

    ICE-ULT3 COM Express Module  SATA Mode Selection [AHCI] Use the SATA Mode Selection option to configure SATA devices as AHCI devices.  AHCI Configures SATA devices as AHCI device. EFAULT  RAID Configures SATA devices as RAID device. NOTE:...

  • Page 69: Usb Configuration

    ICE-ULT3 COM Express Module 5.3.9 USB Configuration Use the USB Configuration menu (BIOS Menu 15) to read USB configuration information and configure the USB settings. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Advanced USB Configuration Enables Legacy USB support.

  • Page 70: Iei Feature

    ICE-ULT3 COM Express Module  Enabled Legacy USB support enabled EFAULT  Disabled Legacy USB support disabled  Auto Legacy USB support disabled if no USB devices are connected 5.3.10 IEI Feature Use the IEI Feature menu (BIOS Menu 16) to configure One Key Recovery function.

  • Page 71: Chipset

    ICE-ULT3 COM Express Module 5.4 Chipset Use the Chipset menu (BIOS Menu 17) to configure the system chipset. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit > System Agent (SA) Configuration System Agent (SA) >...

  • Page 72: Graphics Configuration

    ICE-ULT3 COM Express Module  VT-d [Disabled] Use the VT-d option to enable or disable VT-d support.  Disabled Disable VT-d support. EFAULT  Enabled Enable VT-d support. 5.4.1.1 Graphics Configuration Use the Graphics Configuration menu (BIOS Menu 19) to configure the graphics settings.

  • Page 73: Internal Graphics [Enabled]

    ICE-ULT3 COM Express Module  Internal Graphics [Enabled] Use the Internal Graphics option to enable or disable the internal graphics device.  Auto The internal graphics device is automatically detected and enabled.  Disabled Disable the internal graphics device. ...

  • Page 74: Lcd Control

    ICE-ULT3 COM Express Module  256M  EFAULT 5.4.1.1.1 LCD Control Use the LCD Control submenu (BIOS Menu 20) to select a display device which will be activated during POST. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc.

  • Page 75: On Board Lvds [Enabled]

    ICE-ULT3 COM Express Module  DP2/VGA1  On board LVDS [Enabled] Use the On board LVDS option enables or disables the on-board LVDS connector.  Disabled The on-board LVDS connector is disabled.  Enabled The on-board LVDS connector is enabled.

  • Page 76: Memory Configuration

    ICE-ULT3 COM Express Module  1600x900 48bit  1680x1050 48bit  1600x1200 48bit  1920x1080 48bit  1920x1200 48bit 5.4.1.2 Memory Configuration Use the Memory Configuration submenu (BIOS Menu 21) to display the memory information. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc.

  • Page 77: Pch-Io Configuration

    ICE-ULT3 COM Express Module 5.4.2 PCH-IO Configuration Use the PCH-IO Configuration menu (BIOS Menu 22) to configure the PCH-IO chipset. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Chipset Auto Power Button Status [Disable (ATX)] Select AC power state when...

  • Page 78: Pci Express Configuration

    ICE-ULT3 COM Express Module 5.4.2.1 PCI Express Configuration Use the PCI Express Configuration submenu (BIOS Menu 23) to configure the PCI Express slots. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Chipset PCI Express Configuration PCIE1 (PCIE4X_1 Slot) Settings.

  • Page 79: Hd Audio Configuration

    ICE-ULT3 COM Express Module  Disabled Disables to detect if a non-compliance PCI EFAULT Express device is connected to the PCI Express slot.  Enabled Enables to detect if a non-compliance PCI Express device is connected to the PCI Express slot.

  • Page 80: Security

    ICE-ULT3 COM Express Module  Disabled The High Definition Audio controller is disabled.  Enabled The High Definition Audio controller is enabled. EFAULT 5.5 Security Use the Security menu (BIOS Menu 25) to set system and user passwords. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc.

  • Page 81: Boot

    ICE-ULT3 COM Express Module 5.6 Boot Use the Boot menu (BIOS Menu 26) to configure system boot options. Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc. Main Advanced Chipset Security Boot Save & Exit Boot Configuration Select the keyboard...

  • Page 82: Quiet Boot [Enabled]

    ICE-ULT3 COM Express Module  Does not enable the keyboard Number Lock automatically. To use the 10-keys on the keyboard, press the Number Lock key located on the upper left-hand corner of the 10-key pad. The Number Lock LED on the keyboard lights up when the Number Lock is engaged.

  • Page 83: Exit

    ICE-ULT3 COM Express Module  Option ROM Messages [Force BIOS] Use the Option ROM Messages option to set the Option ROM display mode.  Force Sets display mode to force BIOS. EFAULT BIOS  Keep Sets display mode to current.

  • Page 84: Save Changes And Reset

    ICE-ULT3 COM Express Module  Save Changes and Reset Use the Save Changes and Reset option to save the changes made to the BIOS options and to exit the BIOS configuration setup program.  Discard Changes and Reset Use the Discard Changes and Reset option to exit the system without saving the changes made to the BIOS configuration setup program.

  • Page 85: Software Drivers

    ICE-ULT3 COM Express Module Chapter Software Drivers Page 73...

  • Page 86: Available Drivers

    ICE-ULT3 COM Express Module 6.1 Available Drivers All the drivers for the ICE-ULT3 are available on IEI Resource Download Center (https://download.ieiworld.com). Type ICE-ULT3 and press Enter to find all the relevant software, utilities, and documentation. Figure 6-1: IEI Resource Download Center 6.2 Driver Download...
  • Page 87 ICE-ULT3 COM Express Module Step 3: Click the driver file name on the page and you will be prompted with the  following window. You can download the entire ISO file ( ), or click the small  arrow to find an individual driver and click the file name to download (...
  • Page 88 ICE-ULT3 COM Express Module NOTE: To install software from the downloaded ISO image file in Windows 8, 8.1 or 10, double-click the ISO file to mount it as a virtual drive to view its content. On Windows 7 system, an additional tool (such as Virtual CD-ROM Control Panel from Microsoft) is needed to mount the file.

  • Page 89: Regulatory Compliance

    ICE-ULT3 COM Express Module Appendix Regulatory Compliance Page 77...
  • Page 90 ICE-ULT3 COM Express Module DECLARATION OF CONFORMITY This equipment has been tested and found to comply with specifications for CE marking. If the user modifies and/or installs other devices in the equipment, the CE conformity declaration may no longer apply.

  • Page 91: Product Disposal

    ICE-ULT3 COM Express Module Appendix Product Disposal Page 79...
  • Page 92 ICE-ULT3 COM Express Module CAUTION: Risk of explosion if battery is replaced by an incorrect type. Only certified engineers should replace the on-board battery. Dispose of used batteries according to instructions and local regulations.  Outside the European Union–If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local authority so as to comply with the correct disposal method.

  • Page 93: Cbios Options

    ICE-ULT3 COM Express Module Appendix BIOS Options Page 81...
  • Page 94 ICE-ULT3 COM Express Module Below is a list of BIOS configuration options in the BIOS chapter. System Date [xx/xx/xx] ......................38 System Time [xx:xx:xx] ....................... 38 ACPI Sleep State [S3 (Suspend to RAM)] ................40 Intel AMT [Enabled] ......................41 Un-configure ME [Disabled] ....................
  • Page 95 ICE-ULT3 COM Express Module SATA Mode Selection [AHCI] ....................56 Hot Plug [Disabled] ......................56 USB Devices ......................... 57 Legacy USB Support [Enabled] ..................57 Auto Recovery Function [Disabled] ................... 58 VT-d [Disabled] ........................60 Primary Display [Auto] ......................60 Internal Graphics [Enabled] ....................
  • Page 96 ICE-ULT3 COM Express Module Restore User Defaults ......................72 Page 84...

  • Page 97: Digital I/O Interface

    ICE-ULT3 COM Express Module Appendix Digital I/O Interface Page 85...
  • Page 98 ICE-ULT3 COM Express Module The DIO connector on the ICE-ULT3 is interfaced to GPIO ports on the Super I/O chipset. The digital inputs and digital outputs are generally control signals that control the on/off circuit of external devices or TTL devices. Data can be read or written to the selected address to enable the DIO functions.
  • Page 99 ICE-ULT3 COM Express Module AH – 6FH Sub-function: AL – 9 :Set the digital port as OUTPUT :Digital I/O output value Assembly Language Sample 2 AX, 6F09H ;setting the digital port as output BL, 09H ;digital value is 09H Digital Output is 1001b...

  • Page 100: Watchdog Timer

    ICE-ULT3 COM Express Module Appendix Watchdog Timer Page 88...
  • Page 101 ICE-ULT3 COM Express Module NOTE: The following discussion applies to DOS environment. Contact IEI support or visit the IEI website for specific drivers for other operating systems. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash.
  • Page 102 ICE-ULT3 COM Express Module NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets. EXAMPLE PROGRAM: ; INITIAL TIMER PERIOD COUNTER W_LOOP: AX, 6F02H ;setting the time-out value BL, 30 ;time-out value is 48 seconds ;...

  • Page 103: F Hazardous Materials Disclosure

    ICE-ULT3 COM Express Module Appendix Hazardous Materials Disclosure Page 91...

  • Page 104: Rohs Ii Directive (2015/863/Eu)

    ICE-ULT3 COM Express Module F.1 RoHS II Directive (2015/863/EU) The details provided in this appendix are to ensure that the product is compliant with the RoHS II Directive (2015/863/EU). The table below acknowledges the presences of small quantities of certain substances in the product, and is applicable to RoHS II Directive (2015/863/EU).

  • Page 105: China Rohs

    ICE-ULT3 COM Express Module F.2 China RoHS 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的 年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些 元件将会单独标示出来。 部件名称 有毒有害物质或元素 壳体 显示 印刷电路板 金属螺帽 电缆组装 风扇组装 电力供应组装 电池 O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11364-2014 與 GB/T26572-2011 标准规定的限量要求以下。 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11364-2014 與 GB/T26572-2011 标准规定的限量要求。 Page 93...

This manual is also suitable for:

Ice-ult3-i7Ice-ult3-i3Ice-ult3-c