Leps For P2P Connections - Lancom 3550 Wireless User Manual

Configuration with The encryption settings for the individual logical WLAN networks can be
WEBconfig or Telnet
found under WEBconfig or Telnet under the following paths:
Configuration tool
WEBconfig
Terminal/Telnet
6.4.2

LEPS for P2P connections

A further gain in security can be attained by additionally using LANCOM
Enhanced Passphrase Security (LEPS) which involves the matching of MAC
address and passphrase.
LEPS can be used to secure single point-to-point (P2P) connections with an
individual passphrase. Even if an access point in a P2P installation is stolen
and the passphrase and MAC address become known, all other WLAN con-
nections secured by LEPS remain secure, particularly when the ACL is stored
on a RADIUS server.
When using LANconfig for the configuration, you enter the passphrases of the
stations approved for the WLAN in the configuration area 'WLAN Security' on
the 'Stations' tab under the button Stations.
The access list for the matching of MAC addresses to the passphrases (LEPS)
Configuration with
WEBconfig or Telnet
can be found under WEBconfig or Telnet under the following paths:
Configuration tool
WEBconfig
Terminal/Telnet
Chapter 6: Point- to- point connections
Menu/Table
Expert configuration Setup
Encryption-Settings
/Setup/Interfaces/WLAN-Interfaces/Encryption-Set-
tings
Menu/Table
Expert configuration Setup
Setup/WLAN-module/Access-list
LANCOM 3550 Wireless
Interfaces WLAN-Interfaces
WLAN-module Access-list
55