Lancom 3550 Wireless User Manual page 19

This LED indicates that the device is operational. After the device has been
Power
switched on, it will flash green for the duration of the self-test. After the self-
test, either an error is output by a flashing red light code or the device starts
and the LED remains lit green.
off
green
green
red/
green
red

blinking
blinking alternately
blinking
The power LED flashes red/green in alternation until a configuration
password has been specified. Without a configuration password, the
configuration data of the LANCOM Wireless is insecure. Under normal
Device off
Self-test when powering up
Device ready for use
Device insecure: configuration password not assigned
Time or connect-charge reached
LANCOM 3550 Wireless
Chapter 2: Installation
Power
WLANLink
19