Installing A Hard Drive - HP ProLiant DL320 Generation 5p User Manual

CAUTION:
all bays are populated with either a component or a blank.
Remove the hard drive.
3.

Installing a hard drive

IMPORTANT:
optional controller is installed in the server.
Power down the server (on page 20).
1.
Remove the existing hard drive blank
2.
Prepare the hard drive.
3.
To prevent improper cooling and thermal damage, do not operate the server unless
Hot-plug capability and drive LED support are only available when a supported
("Removing a hard drive blank" on page 32).
Hardware options installation 33