Front panel LEDs and buttons
Front panel LEDs and buttons (standard configuration)
Item
Description
1
12.7-mm optical drive
activity LED
2
UID button/LED
3
Internal health LED
4
NIC 1 link/activity LED
5
NIC 2 link/activity LED
Status
Green = Drive activity is normal.
Amber = Drive failure has occurred.
Off = No drive activity exists.
Blue = Identification is activated.
Flashing blue = System is being remotely managed.
Off = Identification is deactivated.
Green = System health is normal.
Amber = System health is degraded. To identify the component in
a degraded state, see "System board LEDs (on page 16)."
Red = System health is critical. To identify the component in a
critical state, see "System board LEDs (on page 16)."
Off = System health is normal (when in standby mode).
Green = Network link exists.
Flashing green = Network link and activity exist.
Off = No network link exists.
If power is off, view the LEDs on the RJ-45 connector. See "Rear
panel LEDs (on page 13)."
Green = Network link exists.
Flashing green = Network link and activity exist.
Off = No network link exists.
If power is off, the front panel LED is not active. View the LEDs on
the RJ-45 connector. See "Rear panel LEDs (on page 13)."
Component identification 9