Table of Contents
Advertisement
Speakers
Description
Speaker Kit (includes left and right speakers and cables)
Before removing the speakers, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the display enclosure (see
5.
Disconnect the tablet battery cable from the system board (see
6.
Remove the bezel (see
Remove the speakers:
1.
Disconnect the speaker cable (1) from the system board.
2.
Release the left speaker cable from the clips (2) built into the display panel assembly.
3.
Remove the two Phillips PM1.85×3.35 screws (3) that secure the speakers to the display
panel assembly.
4.
Remove the speakers (4).
Reverse this procedure to install the speakers.
Display enclosure on page
Bezel on page
57).
38).
Sensor board on page
Tablet component replacement procedures
Spare part number
740193-001
39).
59
Hide quick links:
Advertisement
Table of Contents
