Keyboard Base Component Replacement Procedures; Bottom Cover - HP Pro x2 410 G1 Maintenance And Service Manual

Keyboard base component replacement procedures

CAUTION:
an authorized service provider. Accessing these parts can damage the keyboard base and void
the warranty.
This chapter provides removal and replacement procedures for authorized service provider only parts.
There are as many as 31 screws that must be removed, replaced, and/or loosened when servicing
the keyboard base. Make special note of each screw size and location during removal
and replacement.

Bottom cover

NOTE:
The bottom cover includes rubber padding, shielding, and 5 rubber feet. The five rubber feet
are included in the Rubber Feet Kit, spare part number 740207-001.
Description
For use only on HP Pro x2 410 G1 PC keyboard bases:
For use only on keyboard bases using a 65-W AC adapter
For use only on keyboard bases using a 45-W AC adapter in South Korea and Taiwan
For use only on HP Pavilion 11 x2 PC keyboard bases:
In flyer red finish
In flyer red finish
In pearl white finish
In sparkling black finish
In sparkling black finish
Before disassembling the keyboard base, follow these steps:
1. Turn off the tablet and keyboard base. If you are unsure whether the tablet and keyboard base are
off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.
Disconnect the power from the tablet and keyboard base by unplugging the power cord from the
tablet and keyboard base.
3. Disconnect the tablet from the keyboard base.
Keyboard base components described in this chapter should only be accessed by
Keyboard base component replacement procedures
Spare part number
759017-001
759018-001
740195-001
757225-001
740196-001
757224-001
740185-001
69