HP Pro x2 410 G1 Maintenance And Service Manual page 100

connected directly to a USB port on the computer; the drive cannot be connected to a USB port on
an external device, such as a USB hub.
Be sure that the computer is connected to AC power before you begin creating the recovery
●
media.
The creation process can take up to an hour or more. Do not interrupt the creation process.
●
If necessary, you can exit the program before you have finished creating all of the recovery DVDs.
●
HP Recovery Manager will finish burning the current DVD. The next time you start HP Recovery
Manager, you will be prompted to continue, and the remaining discs will be burned.
To create HP Recovery media:
IMPORTANT:
only).
1. From the Start screen, type recovery, and then select HP Recovery Manager.
2. Select Recovery Media Creation, and then follow the on-screen instructions.
If you ever need to recover the system, see
92 Chapter 8 Backing up, restoring, and recovering
For tablets, connect to the keyboard dock before beginning these steps (select models
Recovering using HP Recovery Manager on page 93.