HP Pro x2 410 G1 Maintenance And Service Manual page 91

3.
Disconnect the tablet from the keyboard base.
4.
Remove the bottom cover (see
5.
Disconnect the keyboard base battery cable from the docking board (see
on page 71).
Remove the hinge assembly:
1. Disconnect the following cables:
(1) Hinge assembly "HDMI side" cable from the HDMI/USB board
(2) and (3) Hinge assembly cables from the docking board
(4) Hinge assembly "Audio side" cable from the audio/USB board
2.
Release the hinge assembly "HDMI side" cable and "Audio side" cable from the retention clips
(5) built into the hinges.
3. Remove the two Phillips PM1.85×5.50 screws (1) that secure the hinge assembly to the
keyboard/top cover.
Bottom cover on page 69).
Keyboard base component replacement procedures
Keyboard base battery
83