Removal And Replacement Procedures; Tablet Component Replacement Procedures; Display Enclosure - HP Pro x2 410 G1 Maintenance And Service Manual

5 Removal and replacement
procedures

Tablet component replacement procedures

CAUTION:
service provider. Accessing these parts can damage the tablet and void the warranty.
This chapter provides removal and replacement procedures for authorized service provider only parts.
There are as many as 30 screws that must be removed, replaced, and/or loosened when servicing the
tablet. Make special note of each screw size and location during removal and replacement.

Display enclosure

NOTE:
The display enclosure spare part kit includes the power button actuator and the volume
button actuator.
Description
For use only on HP Pro x2 410 G1 PC computer models
For use only on HP Pavilion 11x2 PC computer models:
In flyer red finish
In pearl white finish
In sparkling black finish
Before disassembling the tablet, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
Remove the display enclosure:
38 Chapter 5 Removal and replacement procedures
Tablet components described in this chapter should only be accessed by an authorized
Spare part number
759016-001
740182-001
740183-001
740181-001