Cleaning The Inside Of The Equipment; The Main Chargers And Led Print Heads (E-Studio2000Ac/2500Ac) - Toshiba e-Studio2505AC Hardware Troubleshooting Manual
E-studio5005ac series;
e-studio5008a series.
multifunctional digital colog system /
multifunctional digital systems.
Hide thumbs
Also See for e-Studio2505AC:
- Printing manual (174 pages) ,
- Software installation manual (164 pages) ,
- Copying manual (132 pages)
Table of Contents
Advertisement
Cleaning the Inside of the Equipment
0.
For color models, when the inside of the equipment needs to clean, the message "Time for cleaning. Open the front
cover and follow the guidance." is displayed. In this case, clean the inside of the equipment following the guidance
displayed on the touch panel. (As for monochromatic models, this message is not displayed.)
In addition to this, even if this message is not displayed, perform cleaning when a copied image has unevenness and/
or white or color streaks in the horizontal direction.
The Main Chargers and LED Print Heads (e-STUDIO2000AC/2500AC)
1
Open the front cover of the equipment.
Pull out the cleaner until the mark appears and return it. Repeat this 3 times for each of the 4
2
colors.
The cleaner cannot be removed by design. Pulling it out forcibly may cause malfunction.
When only the main chargers need to be cleaned, steps 3 to 12 are unnecessary. Proceed to step 13.
Put your fingers in the waste toner box front grooves and take it out toward you pushing down
3
the top latch.
Cleaning the Inside of the Equipment 85
Hide quick links:
Advertisement
Table of Contents
